H₂四旋翼研究索引
报告 05 / 公式与推导

SM-E010 · Eqs.(1)–(6)

S08.3 原式转录、符号与采用边界 · 表S08-05 · SM-E010

原表转录或建议式:Q_dot_total = Q_dot_supports + Q_dot_tubes + Q_dot_MLI; each path uses conduction/convection/radiation or calibrated MLI model。; Total W vs local flux W/m2 must be distinguished Support k(T), cold-gas shielding, vacuum/MLI layer density and calibrated workmanship

Q˙total=Q˙supports+Q˙tubes+Q˙MLI\dot Q_{\mathrm{total}}=\dot Q_{\mathrm{supports}}+\dot Q_{\mathrm{tubes}}+\dot Q_{\mathrm{MLI}}
下载 .tex
LaTeX 源码
\dot Q_{\mathrm{total}}=\dot Q_{\mathrm{supports}}+\dot Q_{\mathrm{tubes}}+\dot Q_{\mathrm{MLI}}

推导与代入

  1. Ground2.87W / flight3.29W targets with boundaries
  2. 不同MLI/支撑/管路不能套同一常数;源Eq1为局部通量。

来源与复核

使用同一份资料的条目(33)