{
  "schema_version": 1,
  "task_id": "PAPER-STRUCTURE-R2-001",
  "version": "R2-FINAL-SPEC-1.0.0",
  "selection": {
    "design_id": "IE24_A12_P80G30_NOCHG",
    "fuel_cell_id": "ie-soar2400",
    "cylinder_id": "alsafe-12l",
    "propulsion": "P80 III KV100 / ALPHA80A12S / G30×10.5",
    "status": "selected_maximum_feasible_range_in_screened_catalogue_and5to20mps_domain",
    "historical_null_selection_fields_not_used": true,
    "selected_by_source": "reports/05_simulation/R23-001/range-supplement/summary.json",
    "selected_by_source_sha256": "9be79b6a540fdffb5012aa068ba69150ea1203970c4916a1fd1b0ecb055ea22d"
  },
  "objective": "maximum feasible zero-wind closed-return range with payload,power,SOC and return reserves",
  "design_input_version": "R2-INT-0.5.0",
  "task_model_version_for_final_results": "R23-HE2.1.0",
  "components": [
    {
      "bom_id": "B01",
      "record_kind": "installed_component",
      "name": "四根主机臂碳管",
      "subsystem": "structure",
      "component_id": "ec-cft-wf-30-27",
      "model_or_engineering_spec": "4 arms, OD30/ID27mm tube; cut0.70m each; proposed1.40m opposing-motor span",
      "quantity": 4,
      "mass": {
        "unit_g": 135.66,
        "accounted_unit_g": 135.66,
        "accounted_total_g": 542.64,
        "accounted_total_lower_g": 515.51,
        "accounted_total_upper_g": 596.9,
        "included_in": null,
        "identity": "manufacturer_per_length_or_area_x_declared_geometry_with_engineering_sensitivity_factors",
        "matlab_total_kg_literal": "0.54264",
        "matlab_rule": "declared_geometry_times_source_material_mass",
        "normalization": "row total and bounds copied MATLAB;unit allocation total/quantity;display in g2"
      },
      "power": {
        "continuous_model_W": null,
        "peak_model_W": null,
        "peak_duration_s": null,
        "identity": "passive_no_independent_electrical_load",
        "expression": "无独立电功耗",
        "port": "passive",
        "group_id": "P-PASSIVE",
        "separate_hardware_surge_rating_W": null
      },
      "interface_specification": "碳管外径30.00mm、内径27.00mm；每根长700.00mm；对角跨距1.40m",
      "registered_manufacturer_parameters": [],
      "adopted_engineering_parameters": {},
      "budget_includes": "tube only; clamps/mounts separate",
      "deduplication": "single_accounting_item",
      "source_ids": [
        "R2-REF-TUBE",
        "R2-ENG"
      ],
      "source_locator": "branch overrides > original row;full source locator in original65 registry",
      "source_matlab_row": "reports/05_simulation/R23-001/runs/SIM-R3-001-he-v2/IE24_A12_P80G30_NOCHG-mass-closure.csv#B01",
      "scope": "specified hardware/engineering budget;final closed-return mission adopted separately"
    },
    {
      "bom_id": "B02",
      "record_kind": "installed_component",
      "name": "上下中央承载板",
      "subsystem": "structure",
      "component_id": "ec-cfs-ri-3",
      "model_or_engineering_spec": "two central plates, nominal3mm,0.30x0.25m each; supplier areal mass4.11kg/m2",
      "quantity": 2,
      "mass": {
        "unit_g": 308.25,
        "accounted_unit_g": 308.25,
        "accounted_total_g": 616.5,
        "accounted_total_lower_g": 585.68,
        "accounted_total_upper_g": 678.15,
        "included_in": null,
        "identity": "manufacturer_per_length_or_area_x_declared_geometry_with_engineering_sensitivity_factors",
        "matlab_total_kg_literal": "0.6165",
        "matlab_rule": "declared_geometry_times_source_material_mass",
        "normalization": "row total and bounds copied MATLAB;unit allocation total/quantity;display in g2"
      },
      "power": {
        "continuous_model_W": null,
        "peak_model_W": null,
        "peak_duration_s": null,
        "identity": "passive_no_independent_electrical_load",
        "expression": "无独立电功耗",
        "port": "passive",
        "group_id": "P-PASSIVE",
        "separate_hardware_surge_rating_W": null
      },
      "interface_specification": "碳板厚3.00mm，300.00×250.00mm；材料面密度4.11kg/m²",
      "registered_manufacturer_parameters": [],
      "adopted_engineering_parameters": {},
      "budget_includes": "uncut rectangular plate gross area; no lightening credit",
      "deduplication": "single_accounting_item",
      "source_ids": [
        "R2-REF-PLATE",
        "R2-ENG"
      ],
      "source_locator": "branch overrides > original row;full source locator in original65 registry",
      "source_matlab_row": "reports/05_simulation/R23-001/runs/SIM-R3-001-he-v2/IE24_A12_P80G30_NOCHG-mass-closure.csv#B02",
      "scope": "specified hardware/engineering budget;final closed-return mission adopted separately"
    },
    {
      "bom_id": "B03",
      "record_kind": "installed_component",
      "name": "四块电机安装转接板",
      "subsystem": "structure",
      "component_id": "r2-eng-motor-adapter",
      "model_or_engineering_spec": "3mm CF adapter0.09x0.09m gross each; mount holes per selected motor",
      "quantity": 4,
      "mass": {
        "unit_g": 33.29,
        "accounted_unit_g": 33.29,
        "accounted_total_g": 133.16,
        "accounted_total_lower_g": 126.51,
        "accounted_total_upper_g": 146.48,
        "included_in": null,
        "identity": "manufacturer_per_length_or_area_x_declared_geometry_with_engineering_sensitivity_factors",
        "matlab_total_kg_literal": "0.133164",
        "matlab_rule": "declared_geometry_times_source_material_mass",
        "normalization": "row total and bounds copied MATLAB;unit allocation total/quantity;display in g2"
      },
      "power": {
        "continuous_model_W": null,
        "peak_model_W": null,
        "peak_duration_s": null,
        "identity": "passive_no_independent_electrical_load",
        "expression": "无独立电功耗",
        "port": "passive",
        "group_id": "P-PASSIVE",
        "separate_hardware_surge_rating_W": null
      },
      "interface_specification": "碳板厚3.00mm，90.00×90.00mm，电机转接安装",
      "registered_manufacturer_parameters": [],
      "adopted_engineering_parameters": {},
      "budget_includes": "adapter plates only, screws inB08",
      "deduplication": "single_accounting_item",
      "source_ids": [
        "R2-REF-PLATE",
        "R2-ENG"
      ],
      "source_locator": "branch overrides > original row;full source locator in original65 registry",
      "source_matlab_row": "reports/05_simulation/R23-001/runs/SIM-R3-001-he-v2/IE24_A12_P80G30_NOCHG-mass-closure.csv#B03",
      "scope": "specified hardware/engineering budget;final closed-return mission adopted separately"
    },
    {
      "bom_id": "B04",
      "record_kind": "installed_component",
      "name": "机臂分体夹具",
      "subsystem": "structure",
      "component_id": "r2-eng-clamp30",
      "model_or_engineering_spec": "split30mm tube clamp, aluminium, envelope50x35x10mm; initial allocation30g each",
      "quantity": 8,
      "mass": {
        "unit_g": 30.0,
        "accounted_unit_g": 30.0,
        "accounted_total_g": 240.0,
        "accounted_total_lower_g": 160.0,
        "accounted_total_upper_g": 400.0,
        "included_in": null,
        "identity": "explicit_engineering_allocation_or_task_assumption",
        "matlab_total_kg_literal": "0.24",
        "matlab_rule": "source_or_explicit_engineering_budget",
        "normalization": "row total and bounds copied MATLAB;unit allocation total/quantity;display in g2"
      },
      "power": {
        "continuous_model_W": null,
        "peak_model_W": null,
        "peak_duration_s": null,
        "identity": "passive_no_independent_electrical_load",
        "expression": "无独立电功耗",
        "port": "passive",
        "group_id": "P-PASSIVE",
        "separate_hardware_surge_rating_W": null
      },
      "interface_specification": "夹持30.00mm碳管；包络50.00×35.00×10.00mm",
      "registered_manufacturer_parameters": [],
      "adopted_engineering_parameters": {},
      "budget_includes": "two clamp halves per set; bolt mass inB08",
      "deduplication": "single_accounting_item",
      "source_ids": [
        "R2-ENG"
      ],
      "source_locator": "branch overrides > original row;full source locator in original65 registry",
      "source_matlab_row": "reports/05_simulation/R23-001/runs/SIM-R3-001-he-v2/IE24_A12_P80G30_NOCHG-mass-closure.csv#B04",
      "scope": "specified hardware/engineering budget;final closed-return mission adopted separately"
    },
    {
      "bom_id": "B05",
      "record_kind": "installed_component",
      "name": "四根固定起落架腿",
      "subsystem": "structure",
      "component_id": "ec-cft-wf-30-27",
      "model_or_engineering_spec": "four fixed landing legs0.35m, OD30/ID27mm",
      "quantity": 4,
      "mass": {
        "unit_g": 67.83,
        "accounted_unit_g": 67.83,
        "accounted_total_g": 271.32,
        "accounted_total_lower_g": 257.75,
        "accounted_total_upper_g": 298.45,
        "included_in": null,
        "identity": "manufacturer_per_length_or_area_x_declared_geometry_with_engineering_sensitivity_factors",
        "matlab_total_kg_literal": "0.27132",
        "matlab_rule": "declared_geometry_times_source_material_mass",
        "normalization": "row total and bounds copied MATLAB;unit allocation total/quantity;display in g2"
      },
      "power": {
        "continuous_model_W": null,
        "peak_model_W": null,
        "peak_duration_s": null,
        "identity": "passive_no_independent_electrical_load",
        "expression": "无独立电功耗",
        "port": "passive",
        "group_id": "P-PASSIVE",
        "separate_hardware_surge_rating_W": null
      },
      "interface_specification": "碳管外径30.00mm、内径27.00mm；长350.00mm",
      "registered_manufacturer_parameters": [],
      "adopted_engineering_parameters": {},
      "budget_includes": "tube only",
      "deduplication": "single_accounting_item",
      "source_ids": [
        "R2-REF-TUBE",
        "R2-ENG"
      ],
      "source_locator": "branch overrides > original row;full source locator in original65 registry",
      "source_matlab_row": "reports/05_simulation/R23-001/runs/SIM-R3-001-he-v2/IE24_A12_P80G30_NOCHG-mass-closure.csv#B05",
      "scope": "specified hardware/engineering budget;final closed-return mission adopted separately"
    },
    {
      "bom_id": "B06",
      "record_kind": "installed_component",
      "name": "两根起落架滑橇",
      "subsystem": "structure",
      "component_id": "ec-cft-wf-30-27",
      "model_or_engineering_spec": "two skids0.30m plus end caps inB08",
      "quantity": 2,
      "mass": {
        "unit_g": 58.14,
        "accounted_unit_g": 58.14,
        "accounted_total_g": 116.28,
        "accounted_total_lower_g": 110.47,
        "accounted_total_upper_g": 127.91,
        "included_in": null,
        "identity": "manufacturer_per_length_or_area_x_declared_geometry_with_engineering_sensitivity_factors",
        "matlab_total_kg_literal": "0.11628",
        "matlab_rule": "declared_geometry_times_source_material_mass",
        "normalization": "row total and bounds copied MATLAB;unit allocation total/quantity;display in g2"
      },
      "power": {
        "continuous_model_W": null,
        "peak_model_W": null,
        "peak_duration_s": null,
        "identity": "passive_no_independent_electrical_load",
        "expression": "无独立电功耗",
        "port": "passive",
        "group_id": "P-PASSIVE",
        "separate_hardware_surge_rating_W": null
      },
      "interface_specification": "两根300.00mm滑橇；端盖归B08",
      "registered_manufacturer_parameters": [],
      "adopted_engineering_parameters": {},
      "budget_includes": "tube only",
      "deduplication": "single_accounting_item",
      "source_ids": [
        "R2-REF-TUBE",
        "R2-ENG"
      ],
      "source_locator": "branch overrides > original row;full source locator in original65 registry",
      "source_matlab_row": "reports/05_simulation/R23-001/runs/SIM-R3-001-he-v2/IE24_A12_P80G30_NOCHG-mass-closure.csv#B06",
      "scope": "specified hardware/engineering budget;final closed-return mission adopted separately"
    },
    {
      "bom_id": "B07",
      "record_kind": "installed_component",
      "name": "设备与电池托板",
      "subsystem": "structure",
      "component_id": "ec-cfs-ri-3",
      "model_or_engineering_spec": "two0.25x0.15m equipment/battery trays, nominal3mm",
      "quantity": 2,
      "mass": {
        "unit_g": 154.12,
        "accounted_unit_g": 154.12,
        "accounted_total_g": 308.25,
        "accounted_total_lower_g": 292.84,
        "accounted_total_upper_g": 339.08,
        "included_in": null,
        "identity": "manufacturer_per_length_or_area_x_declared_geometry_with_engineering_sensitivity_factors",
        "matlab_total_kg_literal": "0.30825",
        "matlab_rule": "declared_geometry_times_source_material_mass",
        "normalization": "row total and bounds copied MATLAB;unit allocation total/quantity;display in g2"
      },
      "power": {
        "continuous_model_W": null,
        "peak_model_W": null,
        "peak_duration_s": null,
        "identity": "passive_no_independent_electrical_load",
        "expression": "无独立电功耗",
        "port": "passive",
        "group_id": "P-PASSIVE",
        "separate_hardware_surge_rating_W": null
      },
      "interface_specification": "厚3.00mm；250.00×150.00mm设备/电池托板",
      "registered_manufacturer_parameters": [],
      "adopted_engineering_parameters": {},
      "budget_includes": "mounting trays; no FC or battery duplicate mass",
      "deduplication": "single_accounting_item",
      "source_ids": [
        "R2-REF-PLATE",
        "R2-ENG"
      ],
      "source_locator": "branch overrides > original row;full source locator in original65 registry",
      "source_matlab_row": "reports/05_simulation/R23-001/runs/SIM-R3-001-he-v2/IE24_A12_P80G30_NOCHG-mass-closure.csv#B07",
      "scope": "specified hardware/engineering budget;final closed-return mission adopted separately"
    },
    {
      "bom_id": "B08",
      "record_kind": "installed_component",
      "name": "紧固、支柱、减振及端盖套件",
      "subsystem": "structure",
      "component_id": "r2-eng-hardware-kit",
      "model_or_engineering_spec": "M3/M4 bolts,nuts,standoffs,end caps,damping pads; proposed kit allocation0.18kg",
      "quantity": 1,
      "mass": {
        "unit_g": 180.0,
        "accounted_unit_g": 180.0,
        "accounted_total_g": 180.0,
        "accounted_total_lower_g": 120.0,
        "accounted_total_upper_g": 300.0,
        "included_in": null,
        "identity": "explicit_engineering_allocation_or_task_assumption",
        "matlab_total_kg_literal": "0.18",
        "matlab_rule": "source_or_explicit_engineering_budget",
        "normalization": "row total and bounds copied MATLAB;unit allocation total/quantity;display in g2"
      },
      "power": {
        "continuous_model_W": null,
        "peak_model_W": null,
        "peak_duration_s": null,
        "identity": "passive_no_independent_electrical_load",
        "expression": "无独立电功耗",
        "port": "passive",
        "group_id": "P-PASSIVE",
        "separate_hardware_surge_rating_W": null
      },
      "interface_specification": "M3/M4紧固、支柱、端盖与减振垫一套",
      "registered_manufacturer_parameters": [],
      "adopted_engineering_parameters": {},
      "budget_includes": "structural fasteners and damping only",
      "deduplication": "single_accounting_item",
      "source_ids": [
        "R2-ENG"
      ],
      "source_locator": "branch overrides > original row;full source locator in original65 registry",
      "source_matlab_row": "reports/05_simulation/R23-001/runs/SIM-R3-001-he-v2/IE24_A12_P80G30_NOCHG-mass-closure.csv#B08",
      "scope": "specified hardware/engineering budget;final closed-return mission adopted separately"
    },
    {
      "bom_id": "B09",
      "record_kind": "installed_component",
      "name": "气瓶鞍座与保持带",
      "subsystem": "structure",
      "component_id": "r2-eng-cylinder-cradle",
      "model_or_engineering_spec": "适配200.00mm瓶体的双鞍座与保持带工程规格，180.00g",
      "quantity": 1,
      "mass": {
        "unit_g": 180.0,
        "accounted_unit_g": 180.0,
        "accounted_total_g": 180.0,
        "accounted_total_lower_g": 120.0,
        "accounted_total_upper_g": 300.0,
        "included_in": null,
        "identity": "explicit_engineering_allocation_or_task_assumption",
        "matlab_total_kg_literal": "0.18",
        "matlab_rule": "branch_override",
        "normalization": "row total and bounds copied MATLAB;unit allocation total/quantity;display in g2"
      },
      "power": {
        "continuous_model_W": null,
        "peak_model_W": null,
        "peak_duration_s": null,
        "identity": "passive_no_independent_electrical_load",
        "expression": "无独立电功耗",
        "port": "passive",
        "group_id": "P-PASSIVE",
        "separate_hardware_surge_rating_W": null
      },
      "interface_specification": "适配200.00mm瓶体；双鞍座+两条保持带",
      "registered_manufacturer_parameters": [],
      "adopted_engineering_parameters": {},
      "budget_includes": "cradle/strap fasteners included here, not B08",
      "deduplication": "single_accounting_item",
      "source_ids": [
        "R2-ENG"
      ],
      "source_locator": "branch overrides > original row;full source locator in original65 registry",
      "source_matlab_row": "reports/05_simulation/R23-001/runs/SIM-R3-001-he-v2/IE24_A12_P80G30_NOCHG-mass-closure.csv#B09",
      "scope": "specified hardware/engineering budget;final closed-return mission adopted separately"
    },
    {
      "bom_id": "B10",
      "record_kind": "installed_component",
      "name": "四台推进电机",
      "subsystem": "propulsion",
      "component_id": "tmotor-p80iii-kv100",
      "model_or_engineering_spec": "P80 III KV100，原厂引线，匹配G30推进图",
      "quantity": 4,
      "mass": {
        "unit_g": 649.0,
        "accounted_unit_g": 649.0,
        "accounted_total_g": 2596.0,
        "accounted_total_lower_g": 2596.0,
        "accounted_total_upper_g": 2596.0,
        "included_in": null,
        "identity": "manufacturer_nominal_used_as_design_budget",
        "matlab_total_kg_literal": "2.596",
        "matlab_rule": "branch_override",
        "normalization": "row total and bounds copied MATLAB;unit allocation total/quantity;display in g2"
      },
      "power": {
        "continuous_model_W": 600.0,
        "peak_model_W": 1800.0,
        "peak_duration_s": 10.0,
        "identity": "engineering_input_power_limits_per_motor",
        "expression": "每路推进直流功率图；已含相应ESC/电机转换损耗",
        "port": "propulsion_DC_input",
        "group_id": "P-PROPULSION",
        "separate_hardware_surge_rating_W": null
      },
      "interface_specification": "12S；本方案50.00V",
      "registered_manufacturer_parameters": [
        {
          "parameter": "motor_mass_including_cable",
          "raw_value": "649",
          "raw_unit": "g",
          "source_locator": "Specification and G30x10.5 static tables",
          "record_id": "R2-0185",
          "source_id": "R2-REF-P80"
        }
      ],
      "adopted_engineering_parameters": {},
      "budget_includes": "motor plus original90mm leads; noESC/prop",
      "deduplication": "single_accounting_item",
      "source_ids": [
        "R2-REF-P80"
      ],
      "source_locator": "branch overrides > original row;full source locator in original65 registry",
      "source_matlab_row": "reports/05_simulation/R23-001/runs/SIM-R3-001-he-v2/IE24_A12_P80G30_NOCHG-mass-closure.csv#B10",
      "scope": "specified hardware/engineering budget;final closed-return mission adopted separately"
    },
    {
      "bom_id": "B11",
      "record_kind": "installed_component",
      "name": "四路电子调速器",
      "subsystem": "propulsion",
      "component_id": "tmotor-alpha80-12s",
      "model_or_engineering_spec": "ALPHA80A12S，配套P80固件及原厂线束",
      "quantity": 4,
      "mass": {
        "unit_g": 110.0,
        "accounted_unit_g": 110.0,
        "accounted_total_g": 440.0,
        "accounted_total_lower_g": 440.0,
        "accounted_total_upper_g": 440.0,
        "included_in": null,
        "identity": "manufacturer_nominal_used_as_design_budget",
        "matlab_total_kg_literal": "0.44",
        "matlab_rule": "branch_override",
        "normalization": "row total and bounds copied MATLAB;unit allocation total/quantity;display in g2"
      },
      "power": {
        "continuous_model_W": null,
        "peak_model_W": null,
        "peak_duration_s": null,
        "identity": "included_in_propulsion_electrical_map",
        "expression": "随B10推进图计量，不重复添加ESC损耗",
        "port": "propulsion_DC_input",
        "group_id": "P-PROPULSION",
        "separate_hardware_surge_rating_W": null
      },
      "interface_specification": "输入上限52.20V；本方案50.00V；12S",
      "registered_manufacturer_parameters": [
        {
          "parameter": "esc_mass_including_cables",
          "raw_value": "110",
          "raw_unit": "g",
          "source_locator": "see references.json",
          "record_id": "REFINE-01",
          "source_id": "R2-REF-ALPHA80"
        }
      ],
      "adopted_engineering_parameters": {},
      "budget_includes": "ESC with stock power/motor/signal leads",
      "deduplication": "single_accounting_item",
      "source_ids": [
        "R2-REF-ALPHA80"
      ],
      "source_locator": "branch overrides > original row;full source locator in original65 registry",
      "source_matlab_row": "reports/05_simulation/R23-001/runs/SIM-R3-001-he-v2/IE24_A12_P80G30_NOCHG-mass-closure.csv#B11",
      "scope": "specified hardware/engineering budget;final closed-return mission adopted separately"
    },
    {
      "bom_id": "B12",
      "record_kind": "installed_component",
      "name": "四个完整两叶螺旋桨",
      "subsystem": "propulsion",
      "component_id": "tmotor-g30-10p5",
      "model_or_engineering_spec": "G30×10.5完整两叶桨，2CW+2CCW",
      "quantity": 4,
      "mass": {
        "unit_g": 97.0,
        "accounted_unit_g": 97.0,
        "accounted_total_g": 388.0,
        "accounted_total_lower_g": 368.0,
        "accounted_total_upper_g": 408.0,
        "included_in": null,
        "identity": "manufacturer_nominal_used_as_design_budget",
        "matlab_total_kg_literal": "0.388",
        "matlab_rule": "branch_override",
        "normalization": "row total and bounds copied MATLAB;unit allocation total/quantity;display in g2"
      },
      "power": {
        "continuous_model_W": null,
        "peak_model_W": null,
        "peak_duration_s": null,
        "identity": "passive_no_independent_electrical_load",
        "expression": "无独立电功耗",
        "port": "passive",
        "group_id": "P-PROPULSION",
        "separate_hardware_surge_rating_W": null
      },
      "interface_specification": "直径762.00mm，桨距10.50in；每旋翼一副",
      "registered_manufacturer_parameters": [
        {
          "parameter": "propeller_mass",
          "raw_value": "97 +/-5",
          "raw_unit": "g",
          "source_locator": "see references.json",
          "record_id": "REFINE-02",
          "source_id": "R2-REF-G30"
        }
      ],
      "adopted_engineering_parameters": {},
      "budget_includes": "one integrated prop per rotor, no extra factor2for blades",
      "deduplication": "single_accounting_item",
      "source_ids": [
        "R2-REF-G30"
      ],
      "source_locator": "branch overrides > original row;full source locator in original65 registry",
      "source_matlab_row": "reports/05_simulation/R23-001/runs/SIM-R3-001-he-v2/IE24_A12_P80G30_NOCHG-mass-closure.csv#B12",
      "scope": "specified hardware/engineering budget;final closed-return mission adopted separately"
    },
    {
      "bom_id": "B13",
      "record_kind": "installed_component",
      "name": "燃料电池动力模块父项",
      "subsystem": "fuel_cell",
      "component_id": "ie-soar2400",
      "model_or_engineering_spec": "IE-SOAR2.4kW完整动力模块",
      "quantity": 1,
      "mass": {
        "unit_g": 4800.0,
        "accounted_unit_g": 4800.0,
        "accounted_total_g": 4800.0,
        "accounted_total_lower_g": 4800.0,
        "accounted_total_upper_g": 4800.0,
        "included_in": null,
        "identity": "manufacturer_nominal_used_as_design_budget",
        "matlab_total_kg_literal": "4.8",
        "matlab_rule": "branch_override",
        "normalization": "row total and bounds copied MATLAB;unit allocation total/quantity;display in g2"
      },
      "power": {
        "continuous_model_W": 2280.0,
        "peak_model_W": null,
        "peak_duration_s": null,
        "identity": "adopted_net_bus_cap;manufacturer_nominal2400W",
        "expression": "FC净母线功率；峰值混动由电池端口另计",
        "port": "net_FCPM_bus_output",
        "group_id": "P-PASSIVE",
        "separate_hardware_surge_rating_W": null
      },
      "interface_specification": "PWR+/BATT+/共GND；配置50.00V；入口0.90±0.10bar.g",
      "registered_manufacturer_parameters": [
        {
          "parameter": "maximum_continuous_power",
          "raw_value": "2400",
          "raw_unit": "W",
          "source_locator": "PDF p2规格表",
          "record_id": "WEB-0150",
          "source_id": "R2-REF-WEB"
        },
        {
          "parameter": "hybrid_peak_power",
          "raw_value": "8000",
          "raw_unit": "W",
          "source_locator": "PDF p2规格表",
          "record_id": "WEB-0151",
          "source_id": "R2-REF-WEB"
        },
        {
          "parameter": "module_mass",
          "raw_value": "4.8",
          "raw_unit": "kg",
          "source_locator": "PDF p2规格表",
          "record_id": "WEB-0152",
          "source_id": "R2-REF-WEB"
        },
        {
          "parameter": "net_continuous_power_verified",
          "raw_value": "",
          "raw_unit": "W",
          "source_locator": "PDF p2规格表",
          "record_id": "WEB-0154",
          "source_id": "R2-REF-WEB"
        },
        {
          "parameter": "complete_installed_mass_verified",
          "raw_value": "",
          "raw_unit": "kg",
          "source_locator": "PDF p2规格表",
          "record_id": "WEB-0155",
          "source_id": "R2-REF-WEB"
        },
        {
          "parameter": "configured_output_factory_12S",
          "raw_value": "51.4",
          "raw_unit": "V",
          "source_locator": "IE manual physicalpp.5,8,17–18",
          "record_id": "BUDGET-CHECK-01",
          "source_id": "R2-REF-IE-MANUAL"
        },
        {
          "parameter": "battery_charge_current_config_min",
          "raw_value": "0",
          "raw_unit": "A",
          "source_locator": "IE manual physicalpp.5,8,17–18",
          "record_id": "BUDGET-CHECK-02",
          "source_id": "R2-REF-IE-MANUAL"
        },
        {
          "parameter": "battery_charge_current_config_max",
          "raw_value": "7.5",
          "raw_unit": "A",
          "source_locator": "IE manual physicalpp.5,8,17–18",
          "record_id": "BUDGET-CHECK-03",
          "source_id": "R2-REF-IE-MANUAL"
        },
        {
          "parameter": "default_battery_system_peak",
          "raw_value": "4800",
          "raw_unit": "W",
          "source_locator": "IE manual physicalpp.5,8,17–18",
          "record_id": "BUDGET-CHECK-04",
          "source_id": "R2-REF-IE-MANUAL"
        },
        {
          "parameter": "hydrogen_peak_flow_minimum",
          "raw_value": "50",
          "raw_unit": "L/min",
          "source_locator": "IE manual physicalpp.5,8,17–18",
          "record_id": "BUDGET-CHECK-05",
          "source_id": "R2-REF-IE-MANUAL"
        }
      ],
      "adopted_engineering_parameters": {},
      "budget_includes": "module boundary depends on SKU",
      "deduplication": "single_accounting_item",
      "source_ids": [
        "R2-REF-IE24"
      ],
      "source_locator": "branch overrides > original row;full source locator in original65 registry",
      "source_matlab_row": "reports/05_simulation/R23-001/runs/SIM-R3-001-he-v2/IE24_A12_P80G30_NOCHG-mass-closure.csv#B13",
      "scope": "specified hardware/engineering budget;final closed-return mission adopted separately"
    },
    {
      "bom_id": "B14",
      "record_kind": "included_function",
      "name": "模块内开阴极风扇与原生控制",
      "subsystem": "fuel_cell",
      "component_id": "included-fc-bop",
      "model_or_engineering_spec": "open-cathode fan/cooling and native controls",
      "quantity": 1,
      "mass": {
        "unit_g": null,
        "accounted_unit_g": 0.0,
        "accounted_total_g": 0.0,
        "accounted_total_lower_g": 0.0,
        "accounted_total_upper_g": 0.0,
        "included_in": "B13",
        "identity": "incremental_zero_already_in_parent_not_intrinsic_zero_mass",
        "matlab_total_kg_literal": "0",
        "matlab_rule": "incremental_zero_parent_function_not_unknown",
        "normalization": "row total and bounds copied MATLAB;unit allocation total/quantity;display in g2"
      },
      "power": {
        "continuous_model_W": null,
        "peak_model_W": null,
        "peak_duration_s": null,
        "identity": "included_in_FCPM_net_output",
        "expression": "含在B13模块净功率边界，不另加风扇或原生变换损失",
        "port": "internal_BOP",
        "group_id": "P-INCLUDED-FCPM",
        "separate_hardware_surge_rating_W": null
      },
      "interface_specification": "模块内开阴极风扇/冷却与原生控制，包含于B13",
      "registered_manufacturer_parameters": [],
      "adopted_engineering_parameters": {},
      "budget_includes": "withinB13 if supplied in selected FCPM",
      "deduplication": "parent B13; no separate mass if confirmed",
      "source_ids": [
        "R2-REF-H3",
        "R2-REF-IE24"
      ],
      "source_locator": "branch overrides > original row;full source locator in original65 registry",
      "source_matlab_row": "reports/05_simulation/R23-001/runs/SIM-R3-001-he-v2/IE24_A12_P80G30_NOCHG-mass-closure.csv#B14",
      "scope": "specified hardware/engineering budget;final closed-return mission adopted separately"
    },
    {
      "bom_id": "B15",
      "record_kind": "included_function",
      "name": "模块内功率变换及原生混动端",
      "subsystem": "fuel_cell",
      "component_id": "included-module-regulation",
      "model_or_engineering_spec": "IE native power electronics andPOM separateBATT+/PWR+/commonGND;notexternaldirectbatteryparallel",
      "quantity": 1,
      "mass": {
        "unit_g": null,
        "accounted_unit_g": 0.0,
        "accounted_total_g": 0.0,
        "accounted_total_lower_g": 0.0,
        "accounted_total_upper_g": 0.0,
        "included_in": "B13",
        "identity": "incremental_zero_already_in_parent_not_intrinsic_zero_mass",
        "matlab_total_kg_literal": "0",
        "matlab_rule": "incremental_zero_parent_function_not_unknown",
        "normalization": "row total and bounds copied MATLAB;unit allocation total/quantity;display in g2"
      },
      "power": {
        "continuous_model_W": null,
        "peak_model_W": null,
        "peak_duration_s": null,
        "identity": "included_in_FCPM_net_output",
        "expression": "含在B13模块净功率边界，不另加风扇或原生变换损失",
        "port": "converter",
        "group_id": "P-INCLUDED-FCPM",
        "separate_hardware_surge_rating_W": null
      },
      "interface_specification": "原生POM：BATT+、PWR+、共同GND；包含于B13",
      "registered_manufacturer_parameters": [],
      "adopted_engineering_parameters": {},
      "budget_includes": "IE regulation withinFCPM; H3 option inclusion not assumed",
      "deduplication": "parentB13ifdocumented",
      "source_ids": [
        "R2-REF-IE24",
        "R2-REF-H3"
      ],
      "source_locator": "branch overrides > original row;full source locator in original65 registry",
      "source_matlab_row": "reports/05_simulation/R23-001/runs/SIM-R3-001-he-v2/IE24_A12_P80G30_NOCHG-mass-closure.csv#B15",
      "scope": "specified hardware/engineering budget;final closed-return mission adopted separately"
    },
    {
      "bom_id": "B16",
      "record_kind": "installed_component",
      "name": "外加非回流进排气导流件",
      "subsystem": "fuel_cell",
      "component_id": "r2-eng-airduct",
      "model_or_engineering_spec": "custom non-recirculating intake/discharge guide; initial0.12L polymer volume at1200kg/m3",
      "quantity": 1,
      "mass": {
        "unit_g": 144.0,
        "accounted_unit_g": 144.0,
        "accounted_total_g": 144.0,
        "accounted_total_lower_g": 136.8,
        "accounted_total_upper_g": 158.4,
        "included_in": null,
        "identity": "manufacturer_per_length_or_area_x_declared_geometry_with_engineering_sensitivity_factors",
        "matlab_total_kg_literal": "0.144",
        "matlab_rule": "declared_geometry_times_source_material_mass",
        "normalization": "row total and bounds copied MATLAB;unit allocation total/quantity;display in g2"
      },
      "power": {
        "continuous_model_W": null,
        "peak_model_W": null,
        "peak_duration_s": null,
        "identity": "passive_no_independent_electrical_load",
        "expression": "无独立电功耗",
        "port": "passive",
        "group_id": "P-PASSIVE",
        "separate_hardware_surge_rating_W": null
      },
      "interface_specification": "非回流导流件；聚合物体积0.12L、材料密度1200.00kg/m³",
      "registered_manufacturer_parameters": [],
      "adopted_engineering_parameters": {},
      "budget_includes": "duct only, fan inFCPM",
      "deduplication": "single_accounting_item",
      "source_ids": [
        "R2-ENG"
      ],
      "source_locator": "branch overrides > original row;full source locator in original65 registry",
      "source_matlab_row": "reports/05_simulation/R23-001/runs/SIM-R3-001-he-v2/IE24_A12_P80G30_NOCHG-mass-closure.csv#B16",
      "scope": "specified hardware/engineering budget;final closed-return mission adopted separately"
    },
    {
      "bom_id": "B17",
      "record_kind": "installed_component",
      "name": "空储氢瓶",
      "subsystem": "hydrogen_storage",
      "component_id": "alsafe-12l",
      "model_or_engineering_spec": "Alsafe UQL-192-12-35-T/A",
      "quantity": 1,
      "mass": {
        "unit_g": 4300.0,
        "accounted_unit_g": 4300.0,
        "accounted_total_g": 4300.0,
        "accounted_total_lower_g": 4300.0,
        "accounted_total_upper_g": 4300.0,
        "included_in": null,
        "identity": "manufacturer_nominal_used_as_design_budget",
        "matlab_total_kg_literal": "4.3",
        "matlab_rule": "branch_override",
        "normalization": "row total and bounds copied MATLAB;unit allocation total/quantity;display in g2"
      },
      "power": {
        "continuous_model_W": null,
        "peak_model_W": null,
        "peak_duration_s": null,
        "identity": "passive_no_independent_electrical_load",
        "expression": "无独立电功耗",
        "port": "passive",
        "group_id": "P-PASSIVE",
        "separate_hardware_surge_rating_W": null
      },
      "interface_specification": "水容积12.00L；350.00bar；外径200.00mm、长536.00mm",
      "registered_manufacturer_parameters": [
        {
          "parameter": "water_volume",
          "raw_value": "12.0",
          "raw_unit": "L",
          "source_locator": "HTML TECHNICAL SPECIFICATIONS完整型号行",
          "record_id": "WEB-0083",
          "source_id": "R2-REF-WEB"
        },
        {
          "parameter": "empty_tank_mass",
          "raw_value": "4.3",
          "raw_unit": "kg",
          "source_locator": "HTML TECHNICAL SPECIFICATIONS完整型号行",
          "record_id": "WEB-0084",
          "source_id": "R2-REF-WEB"
        },
        {
          "parameter": "hydrogen_capacity",
          "raw_value": "284",
          "raw_unit": "g",
          "source_locator": "HTML TECHNICAL SPECIFICATIONS完整型号行",
          "record_id": "WEB-0085",
          "source_id": "R2-REF-WEB"
        },
        {
          "parameter": "working_pressure",
          "raw_value": "350",
          "raw_unit": "bar",
          "source_locator": "HTML TECHNICAL SPECIFICATIONS完整型号行",
          "record_id": "WEB-0086",
          "source_id": "R2-REF-WEB"
        }
      ],
      "adopted_engineering_parameters": {},
      "budget_includes": "empty-cylinder defined boundary; hydrogen inB18",
      "deduplication": "single_accounting_item",
      "source_ids": [
        "R2-REF-ALSAFE"
      ],
      "source_locator": "branch overrides > original row;full source locator in original65 registry",
      "source_matlab_row": "reports/05_simulation/R23-001/runs/SIM-R3-001-he-v2/IE24_A12_P80G30_NOCHG-mass-closure.csv#B17",
      "scope": "specified hardware/engineering budget;final closed-return mission adopted separately"
    },
    {
      "bom_id": "B18",
      "record_kind": "consumable_inventory",
      "name": "初装氢库存",
      "subsystem": "hydrogen_storage",
      "component_id": "alsafe-12l-h2-inventory",
      "model_or_engineering_spec": "Alsafe12L目录初装氢库存",
      "quantity": 1,
      "mass": {
        "unit_g": 284.0,
        "accounted_unit_g": 284.0,
        "accounted_total_g": 284.0,
        "accounted_total_lower_g": 284.0,
        "accounted_total_upper_g": 284.0,
        "included_in": null,
        "identity": "manufacturer_nominal_used_as_design_budget",
        "matlab_total_kg_literal": "0.284",
        "matlab_rule": "branch_override",
        "normalization": "row total and bounds copied MATLAB;unit allocation total/quantity;display in g2"
      },
      "power": {
        "continuous_model_W": null,
        "peak_model_W": null,
        "peak_duration_s": null,
        "identity": "passive_no_independent_electrical_load",
        "expression": "无独立电功耗",
        "port": "passive",
        "group_id": "P-PASSIVE",
        "separate_hardware_surge_rating_W": null
      },
      "interface_specification": "初装284.00g；任务余氢判据5.00%",
      "registered_manufacturer_parameters": [],
      "adopted_engineering_parameters": {},
      "budget_includes": "pure H2 mass once only; changesduringflight",
      "deduplication": "single_accounting_item",
      "source_ids": [
        "R2-REF-ALSAFE"
      ],
      "source_locator": "branch overrides > original row;full source locator in original65 registry",
      "source_matlab_row": "reports/05_simulation/R23-001/runs/SIM-R3-001-he-v2/IE24_A12_P80G30_NOCHG-mass-closure.csv#B18",
      "scope": "specified hardware/engineering budget;final closed-return mission adopted separately"
    },
    {
      "bom_id": "B19",
      "record_kind": "installed_component",
      "name": "匹配的高流量轻量调压器",
      "subsystem": "hydrogen_supply",
      "component_id": "ie-hflw-regulator",
      "model_or_engineering_spec": "IE HFLW轻量高流量调压器，315.00g名义附件",
      "quantity": 1,
      "mass": {
        "unit_g": 315.0,
        "accounted_unit_g": 315.0,
        "accounted_total_g": 315.0,
        "accounted_total_lower_g": 315.0,
        "accounted_total_upper_g": 315.0,
        "included_in": null,
        "identity": "manufacturer_nominal_used_as_design_budget",
        "matlab_total_kg_literal": "0.315",
        "matlab_rule": "branch_override",
        "normalization": "row total and bounds copied MATLAB;unit allocation total/quantity;display in g2"
      },
      "power": {
        "continuous_model_W": null,
        "peak_model_W": null,
        "peak_duration_s": null,
        "identity": "passive_no_independent_electrical_load",
        "expression": "无独立电功耗",
        "port": "passive",
        "group_id": "P-PASSIVE",
        "separate_hardware_surge_rating_W": null
      },
      "interface_specification": "供氢出口与IE0.90±0.10bar.g模块接口匹配",
      "registered_manufacturer_parameters": [],
      "adopted_engineering_parameters": {},
      "budget_includes": "regulator with documented integral controls only",
      "deduplication": "single_accounting_item",
      "source_ids": [
        "R2-REF-IE24"
      ],
      "source_locator": "branch overrides > original row;full source locator in original65 registry",
      "source_matlab_row": "reports/05_simulation/R23-001/runs/SIM-R3-001-he-v2/IE24_A12_P80G30_NOCHG-mass-closure.csv#B19",
      "scope": "specified hardware/engineering budget;final closed-return mission adopted separately"
    },
    {
      "bom_id": "B20",
      "record_kind": "included_function",
      "name": "已包含的瓶侧隔离、测压与泄压功能",
      "subsystem": "hydrogen_supply",
      "component_id": "vendor-integral-safety",
      "model_or_engineering_spec": "瓶侧手动隔离、压力测量及PRD按B19父项计量，未含部分由B51计入",
      "quantity": 1,
      "mass": {
        "unit_g": null,
        "accounted_unit_g": 0.0,
        "accounted_total_g": 0.0,
        "accounted_total_lower_g": 0.0,
        "accounted_total_upper_g": 0.0,
        "included_in": "B19",
        "identity": "incremental_zero_already_in_parent_not_intrinsic_zero_mass",
        "matlab_total_kg_literal": "0",
        "matlab_rule": "incremental_zero_parent_function_not_unknown",
        "normalization": "row total and bounds copied MATLAB;unit allocation total/quantity;display in g2"
      },
      "power": {
        "continuous_model_W": null,
        "peak_model_W": null,
        "peak_duration_s": null,
        "identity": "passive_no_independent_electrical_load",
        "expression": "无独立电功耗",
        "port": "passive",
        "group_id": "P-PASSIVE",
        "separate_hardware_surge_rating_W": null
      },
      "interface_specification": "归B19的隔离/测压/泄压功能；未含瓶侧附件由B51预算",
      "registered_manufacturer_parameters": [],
      "adopted_engineering_parameters": {},
      "budget_includes": "H3p28integral functions; IE not assumed identical",
      "deduplication": "parentB19ifdocumented",
      "source_ids": [
        "R2-REF-H3",
        "R2-ENG"
      ],
      "source_locator": "branch overrides > original row;full source locator in original65 registry",
      "source_matlab_row": "reports/05_simulation/R23-001/runs/SIM-R3-001-he-v2/IE24_A12_P80G30_NOCHG-mass-closure.csv#B20",
      "scope": "specified hardware/engineering budget;final closed-return mission adopted separately"
    },
    {
      "bom_id": "B21",
      "record_kind": "installed_component",
      "name": "调压后低压失电关闭阀",
      "subsystem": "hydrogen_supply",
      "component_id": "parker-series11-model20-spec",
      "model_or_engineering_spec": "Parker Series11 Model20类二通NC阀工程规格：12.00V/1.00W、2.59mm孔径、FKM及不锈钢",
      "quantity": 1,
      "mass": {
        "unit_g": 60.0,
        "accounted_unit_g": 60.0,
        "accounted_total_g": 60.0,
        "accounted_total_lower_g": 60.0,
        "accounted_total_upper_g": 60.0,
        "included_in": null,
        "identity": "manufacturer_point_value_no_claim_of_zero_uncertainty",
        "matlab_total_kg_literal": "0.06",
        "matlab_rule": "source_or_explicit_engineering_budget",
        "normalization": "row total and bounds copied MATLAB;unit allocation total/quantity;display in g2"
      },
      "power": {
        "continuous_model_W": 1.0,
        "peak_model_W": 1.0,
        "peak_duration_s": null,
        "identity": "constant_engineering_load_budget_not_transient_rating",
        "expression": "",
        "port": "regulated12V_output",
        "group_id": "P-AUX12",
        "separate_hardware_surge_rating_W": null
      },
      "interface_specification": "二通失电关闭；孔径2.59mm；12.00V、1.00W；FKM/不锈钢工程选项",
      "registered_manufacturer_parameters": [],
      "adopted_engineering_parameters": {},
      "budget_includes": "familyvalve mass; external fittings inB24",
      "deduplication": "single_accounting_item",
      "source_ids": [
        "R2-REF-PARKER",
        "R2-ENG"
      ],
      "source_locator": "branch overrides > original row;full source locator in original65 registry",
      "source_matlab_row": "reports/05_simulation/R23-001/runs/SIM-R3-001-he-v2/IE24_A12_P80G30_NOCHG-mass-closure.csv#B21",
      "scope": "specified hardware/engineering budget;final closed-return mission adopted separately"
    },
    {
      "bom_id": "B22",
      "record_kind": "installed_component",
      "name": "氢气低压过滤器",
      "subsystem": "hydrogen_supply",
      "component_id": "r2-eng-h2-filter",
      "model_or_engineering_spec": "40micron lowpressureH2-compatibleinlinefilter,316L,F KM-compatibleseals;45g allowance",
      "quantity": 1,
      "mass": {
        "unit_g": 45.0,
        "accounted_unit_g": 45.0,
        "accounted_total_g": 45.0,
        "accounted_total_lower_g": 25.0,
        "accounted_total_upper_g": 80.0,
        "included_in": null,
        "identity": "explicit_engineering_allocation_or_task_assumption",
        "matlab_total_kg_literal": "0.045",
        "matlab_rule": "source_or_explicit_engineering_budget",
        "normalization": "row total and bounds copied MATLAB;unit allocation total/quantity;display in g2"
      },
      "power": {
        "continuous_model_W": null,
        "peak_model_W": null,
        "peak_duration_s": null,
        "identity": "passive_no_independent_electrical_load",
        "expression": "无独立电功耗",
        "port": "passive",
        "group_id": "P-PASSIVE",
        "separate_hardware_surge_rating_W": null
      },
      "interface_specification": "40.00µm低压氢过滤；316L、氢相容密封；与B24管路接头匹配",
      "registered_manufacturer_parameters": [],
      "adopted_engineering_parameters": {},
      "budget_includes": "housing/filter only",
      "deduplication": "single_accounting_item",
      "source_ids": [
        "R2-REF-PARKER",
        "R2-REF-SWAGE-H2",
        "R2-ENG"
      ],
      "source_locator": "branch overrides > original row;full source locator in original65 registry",
      "source_matlab_row": "reports/05_simulation/R23-001/runs/SIM-R3-001-he-v2/IE24_A12_P80G30_NOCHG-mass-closure.csv#B22",
      "scope": "specified hardware/engineering budget;final closed-return mission adopted separately"
    },
    {
      "bom_id": "B23",
      "record_kind": "installed_component",
      "name": "原厂推荐六毫米供氢管",
      "subsystem": "hydrogen_supply",
      "component_id": "parker-legris-1025u06k01",
      "model_or_engineering_spec": "IE-recommended6mmODx4mmIDtubing,total1.00m:main0.60m+twoSPMbranches0.20meach",
      "quantity": 1,
      "mass": {
        "unit_g": 23.2,
        "accounted_unit_g": 23.2,
        "accounted_total_g": 23.2,
        "accounted_total_lower_g": 20.88,
        "accounted_total_upper_g": 27.84,
        "included_in": null,
        "identity": "manufacturer25mcoilweight_times_declaredcutlength_conservative_budget",
        "matlab_total_kg_literal": "0.0232",
        "matlab_rule": "declared_geometry_times_source_material_mass",
        "normalization": "row total and bounds copied MATLAB;unit allocation total/quantity;display in g2"
      },
      "power": {
        "continuous_model_W": null,
        "peak_model_W": null,
        "peak_duration_s": null,
        "identity": "passive_no_independent_electrical_load",
        "expression": "无独立电功耗",
        "port": "passive",
        "group_id": "P-PASSIVE",
        "separate_hardware_surge_rating_W": null
      },
      "interface_specification": "Legris1025U06K01，外径6.00mm/内径4.00mm；总1.00m=主段0.60m+两支0.20m",
      "registered_manufacturer_parameters": [],
      "adopted_engineering_parameters": {},
      "budget_includes": "cutpolymerlineonly;OEMquickconnector/tee/adaptersinB24",
      "deduplication": "single_accounting_item",
      "source_ids": [
        "R2-REF-IE-MANUAL",
        "R2-REF-LEGRIS",
        "R2-ENG"
      ],
      "source_locator": "branch overrides > original row;full source locator in original65 registry",
      "source_matlab_row": "reports/05_simulation/R23-001/runs/SIM-R3-001-he-v2/IE24_A12_P80G30_NOCHG-mass-closure.csv#B23",
      "scope": "specified hardware/engineering budget;final closed-return mission adopted separately"
    },
    {
      "bom_id": "B24",
      "record_kind": "installed_component",
      "name": "快接、分流和阀接口适配套件",
      "subsystem": "hydrogen_supply",
      "component_id": "r2-eng-h2-fitting-kit",
      "model_or_engineering_spec": "HFLWconnectionand6mmtees/6mm-to-valve-manifoldadapters;fourpart20gperpartengineeringbudget",
      "quantity": 4,
      "mass": {
        "unit_g": 20.0,
        "accounted_unit_g": 20.0,
        "accounted_total_g": 80.0,
        "accounted_total_lower_g": 40.0,
        "accounted_total_upper_g": 140.0,
        "included_in": null,
        "identity": "explicit_engineering_allocation_or_task_assumption",
        "matlab_total_kg_literal": "0.08",
        "matlab_rule": "source_or_explicit_engineering_budget",
        "normalization": "row total and bounds copied MATLAB;unit allocation total/quantity;display in g2"
      },
      "power": {
        "continuous_model_W": null,
        "peak_model_W": null,
        "peak_duration_s": null,
        "identity": "passive_no_independent_electrical_load",
        "expression": "无独立电功耗",
        "port": "passive",
        "group_id": "P-PASSIVE",
        "separate_hardware_surge_rating_W": null
      },
      "interface_specification": "6.00mm分流/阀接口适配件4个；每件20.00g工程分配",
      "registered_manufacturer_parameters": [],
      "adopted_engineering_parameters": {},
      "budget_includes": "adapter bodies/ferrules; doesnotduplicatevalvemass",
      "deduplication": "single_accounting_item",
      "source_ids": [
        "R2-REF-IE-MANUAL",
        "R2-REF-LEGRIS",
        "R2-REF-PARKER",
        "R2-ENG"
      ],
      "source_locator": "branch overrides > original row;full source locator in original65 registry",
      "source_matlab_row": "reports/05_simulation/R23-001/runs/SIM-R3-001-he-v2/IE24_A12_P80G30_NOCHG-mass-closure.csv#B24",
      "scope": "specified hardware/engineering budget;final closed-return mission adopted separately"
    },
    {
      "bom_id": "B25",
      "record_kind": "installed_component",
      "name": "调压后氢压测量",
      "subsystem": "hydrogen_supply",
      "component_id": "r2-eng-h2-pressure-sensor",
      "model_or_engineering_spec": "0–2.5barg,dryweldedH2-compatiblepressuretransducer,0–5V/ADC,50g/0.5W allocation",
      "quantity": 1,
      "mass": {
        "unit_g": 50.0,
        "accounted_unit_g": 50.0,
        "accounted_total_g": 50.0,
        "accounted_total_lower_g": 30.0,
        "accounted_total_upper_g": 100.0,
        "included_in": null,
        "identity": "explicit_engineering_allocation_or_task_assumption",
        "matlab_total_kg_literal": "0.05",
        "matlab_rule": "source_or_explicit_engineering_budget",
        "normalization": "row total and bounds copied MATLAB;unit allocation total/quantity;display in g2"
      },
      "power": {
        "continuous_model_W": 0.5,
        "peak_model_W": 0.5,
        "peak_duration_s": null,
        "identity": "constant_engineering_load_budget_not_transient_rating",
        "expression": "",
        "port": "regulated5V_safety_output",
        "group_id": "P-SAFETY5",
        "separate_hardware_surge_rating_W": null
      },
      "interface_specification": "0–2.50bar.g；0–5.00V/ADC；5.00V供电",
      "registered_manufacturer_parameters": [],
      "adopted_engineering_parameters": {},
      "budget_includes": "transducer only, lowpressurevariantnotyetprocurementconfirmed",
      "deduplication": "single_accounting_item",
      "source_ids": [
        "R2-REF-PRESSURE",
        "R2-ENG"
      ],
      "source_locator": "branch overrides > original row;full source locator in original65 registry",
      "source_matlab_row": "reports/05_simulation/R23-001/runs/SIM-R3-001-he-v2/IE24_A12_P80G30_NOCHG-mass-closure.csv#B25",
      "scope": "specified hardware/engineering budget;final closed-return mission adopted separately"
    },
    {
      "bom_id": "B26",
      "record_kind": "installed_component",
      "name": "独立排氢/泄压导管",
      "subsystem": "hydrogen_supply",
      "component_id": "swagelok-ventline-spec",
      "model_or_engineering_spec": "0.30m316Lventroute,physicallyseparatefromFCPMintake/electronics",
      "quantity": 1,
      "mass": {
        "unit_g": 36.0,
        "accounted_unit_g": 36.0,
        "accounted_total_g": 36.0,
        "accounted_total_lower_g": 34.2,
        "accounted_total_upper_g": 39.6,
        "included_in": null,
        "identity": "manufacturer_per_length_or_area_x_declared_geometry_with_engineering_sensitivity_factors",
        "matlab_total_kg_literal": "0.036",
        "matlab_rule": "declared_geometry_times_source_material_mass",
        "normalization": "row total and bounds copied MATLAB;unit allocation total/quantity;display in g2"
      },
      "power": {
        "continuous_model_W": null,
        "peak_model_W": null,
        "peak_duration_s": null,
        "identity": "passive_no_independent_electrical_load",
        "expression": "无独立电功耗",
        "port": "passive",
        "group_id": "P-PASSIVE",
        "separate_hardware_surge_rating_W": null
      },
      "interface_specification": "316L排氢支路长0.30m；与进气及电子设备物理分离",
      "registered_manufacturer_parameters": [],
      "adopted_engineering_parameters": {},
      "budget_includes": "venttube; selectactualventoutletfittingswithinB24oradd",
      "deduplication": "single_accounting_item",
      "source_ids": [
        "R2-REF-SWAGE",
        "R2-ENG"
      ],
      "source_locator": "branch overrides > original row;full source locator in original65 registry",
      "source_matlab_row": "reports/05_simulation/R23-001/runs/SIM-R3-001-he-v2/IE24_A12_P80G30_NOCHG-mass-closure.csv#B26",
      "scope": "specified hardware/engineering budget;final closed-return mission adopted separately"
    },
    {
      "bom_id": "B27",
      "record_kind": "installed_component",
      "name": "氢浓度检测模块",
      "subsystem": "hydrogen_safety",
      "component_id": "figaro-fcm6812-p00",
      "model_or_engineering_spec": "FCM6812-P00module,5V,installedinrepresentativeleakcollectionlocation",
      "quantity": 1,
      "mass": {
        "unit_g": 15.0,
        "accounted_unit_g": 15.0,
        "accounted_total_g": 15.0,
        "accounted_total_lower_g": 15.0,
        "accounted_total_upper_g": 15.0,
        "included_in": null,
        "identity": "manufacturer_point_value_no_claim_of_zero_uncertainty",
        "matlab_total_kg_literal": "0.015",
        "matlab_rule": "source_or_explicit_engineering_budget",
        "normalization": "row total and bounds copied MATLAB;unit allocation total/quantity;display in g2"
      },
      "power": {
        "continuous_model_W": 1.5,
        "peak_model_W": 1.5,
        "peak_duration_s": null,
        "identity": "constant_engineering_load_budget_not_transient_rating",
        "expression": "",
        "port": "regulated5V_safety_output",
        "group_id": "P-SAFETY5",
        "separate_hardware_surge_rating_W": null
      },
      "interface_specification": "Figaro FCM6812-P00，5.00±0.20V",
      "registered_manufacturer_parameters": [
        {
          "parameter": "module_mass",
          "raw_value": "approximately 15",
          "raw_unit": "g",
          "source_locator": "FCM6812-P00 specification",
          "record_id": "R2-0194",
          "source_id": "R2-REF-H2S"
        },
        {
          "parameter": "typical_power",
          "raw_value": "approximately 1.0",
          "raw_unit": "W",
          "source_locator": "FCM6812-P00 specification",
          "record_id": "R2-0195",
          "source_id": "R2-REF-H2S"
        }
      ],
      "adopted_engineering_parameters": {},
      "budget_includes": "sensormodule; enclosureinB28",
      "deduplication": "single_accounting_item",
      "source_ids": [
        "R2-REF-H2S"
      ],
      "source_locator": "branch overrides > original row;full source locator in original65 registry",
      "source_matlab_row": "reports/05_simulation/R23-001/runs/SIM-R3-001-he-v2/IE24_A12_P80G30_NOCHG-mass-closure.csv#B27",
      "scope": "specified hardware/engineering budget;final closed-return mission adopted separately"
    },
    {
      "bom_id": "B28",
      "record_kind": "installed_component",
      "name": "安全控制、阀驱动及检测器安装",
      "subsystem": "hydrogen_safety",
      "component_id": "r2-eng-safety-controller",
      "model_or_engineering_spec": "independentwatchdogMCU,ADCconditioner,valvedriver,protectivecase,H2sensormount;60g/2W budget",
      "quantity": 1,
      "mass": {
        "unit_g": 60.0,
        "accounted_unit_g": 60.0,
        "accounted_total_g": 60.0,
        "accounted_total_lower_g": 40.0,
        "accounted_total_upper_g": 100.0,
        "included_in": null,
        "identity": "explicit_engineering_allocation_or_task_assumption",
        "matlab_total_kg_literal": "0.06",
        "matlab_rule": "source_or_explicit_engineering_budget",
        "normalization": "row total and bounds copied MATLAB;unit allocation total/quantity;display in g2"
      },
      "power": {
        "continuous_model_W": 2.0,
        "peak_model_W": 2.0,
        "peak_duration_s": null,
        "identity": "constant_engineering_load_budget_not_transient_rating",
        "expression": "",
        "port": "regulated5V_safety_output",
        "group_id": "P-SAFETY5",
        "separate_hardware_surge_rating_W": null
      },
      "interface_specification": "独立看门狗MCU、ADC、阀驱动；5.00V与12.00V驱动接口",
      "registered_manufacturer_parameters": [],
      "adopted_engineering_parameters": {},
      "budget_includes": "40gboard/driver+20gcase/mount allocation; noH2sensorweight",
      "deduplication": "single_accounting_item",
      "source_ids": [
        "R2-ENG"
      ],
      "source_locator": "branch overrides > original row;full source locator in original65 registry",
      "source_matlab_row": "reports/05_simulation/R23-001/runs/SIM-R3-001-he-v2/IE24_A12_P80G30_NOCHG-mass-closure.csv#B28",
      "scope": "specified hardware/engineering budget;final closed-return mission adopted separately"
    },
    {
      "bom_id": "B29",
      "record_kind": "installed_component",
      "name": "两块六串缓冲电池",
      "subsystem": "hybrid_battery",
      "component_id": "gens-ace-gea336s60e5gt",
      "model_or_engineering_spec": "GEA336S60E5GT，GA-B-60C-3300-6S1P-EC5-GT，两包串联",
      "quantity": 2,
      "mass": {
        "unit_g": 506.0,
        "accounted_unit_g": 506.0,
        "accounted_total_g": 1012.0,
        "accounted_total_lower_g": 972.0,
        "accounted_total_upper_g": 1052.0,
        "included_in": null,
        "identity": "manufacturer_nominal_used_as_design_budget",
        "matlab_total_kg_literal": "1.012",
        "matlab_rule": "branch_override",
        "normalization": "row total and bounds copied MATLAB;unit allocation total/quantity;display in g2"
      },
      "power": {
        "continuous_model_W": null,
        "peak_model_W": null,
        "peak_duration_s": null,
        "identity": "dynamic_battery_bus_port",
        "expression": "两包串联组成同一缓冲组，按任务P_bat,bus(t)计；不以C标签代替任务峰值",
        "port": "OEM_BATT_port",
        "group_id": "P-PASSIVE",
        "separate_hardware_surge_rating_W": null
      },
      "interface_specification": "每包6S/3.30Ah/22.20V；组12S；地面上限49.20V",
      "registered_manufacturer_parameters": [],
      "adopted_engineering_parameters": {},
      "budget_includes": "packwithstockleads/EC5;externalseriesharnessinB34",
      "deduplication": "single_accounting_item",
      "source_ids": [
        "R2-REF-GENS-GT"
      ],
      "source_locator": "branch overrides > original row;full source locator in original65 registry",
      "source_matlab_row": "reports/05_simulation/R23-001/runs/SIM-R3-001-he-v2/IE24_A12_P80G30_NOCHG-mass-closure.csv#B29",
      "scope": "specified hardware/engineering budget;final closed-return mission adopted separately"
    },
    {
      "bom_id": "B30",
      "record_kind": "installed_component",
      "name": "十二串单体监测与电池保护板",
      "subsystem": "hybrid_battery",
      "component_id": "r2-eng-bq76952-bms",
      "model_or_engineering_spec": "BQ76952类12S BMS整板工程规格：30.00A连续、60.00A/10.00s，含FET/分流器/NTC",
      "quantity": 1,
      "mass": {
        "unit_g": 80.0,
        "accounted_unit_g": 80.0,
        "accounted_total_g": 80.0,
        "accounted_total_lower_g": 50.0,
        "accounted_total_upper_g": 150.0,
        "included_in": null,
        "identity": "explicit_engineering_allocation_or_task_assumption",
        "matlab_total_kg_literal": "0.08",
        "matlab_rule": "source_or_explicit_engineering_budget",
        "normalization": "row total and bounds copied MATLAB;unit allocation total/quantity;display in g2"
      },
      "power": {
        "continuous_model_W": 1.5,
        "peak_model_W": 1.5,
        "peak_duration_s": null,
        "identity": "constant_engineering_load_budget_not_transient_rating",
        "expression": "",
        "port": "battery_inventory",
        "group_id": "P-BMS",
        "separate_hardware_surge_rating_W": null
      },
      "interface_specification": "12S；AFE3–16S；本版限流30.00A连续、60.00A/10.00s，检验端口42.00V；自耗1.50W",
      "registered_manufacturer_parameters": [],
      "adopted_engineering_parameters": {
        "continuous_current_A": 30.0,
        "peak_current_A": 60.0,
        "peak_duration_s": 10.0,
        "current_check_voltage_V": 42.0,
        "identity": "adopted task/BMS design values,not BQ76952 IC power rating"
      },
      "budget_includes": "30gPCB/components+20gFET/shunt+30gcase/connectors allocation",
      "deduplication": "single_accounting_item",
      "source_ids": [
        "R2-REF-BMS",
        "R2-ENG"
      ],
      "source_locator": "branch overrides > original row;full source locator in original65 registry",
      "source_matlab_row": "reports/05_simulation/R23-001/runs/SIM-R3-001-he-v2/IE24_A12_P80G30_NOCHG-mass-closure.csv#B30",
      "scope": "specified hardware/engineering budget;final closed-return mission adopted separately"
    },
    {
      "bom_id": "B31",
      "record_kind": "installed_component",
      "name": "电池和动力输出支路保险/座",
      "subsystem": "dc_power",
      "component_id": "littelfuse-04980900zxt-family",
      "model_or_engineering_spec": "两条58.00V MIDI保险支路：FC60.00A，缓冲电池60.00A；每路含保持座",
      "quantity": 2,
      "mass": {
        "unit_g": 45.0,
        "accounted_unit_g": 45.0,
        "accounted_total_g": 90.0,
        "accounted_total_lower_g": 60.0,
        "accounted_total_upper_g": 140.0,
        "included_in": null,
        "identity": "explicit_engineering_allocation_or_task_assumption",
        "matlab_total_kg_literal": "0.09",
        "matlab_rule": "source_or_explicit_engineering_budget",
        "normalization": "row total and bounds copied MATLAB;unit allocation total/quantity;display in g2"
      },
      "power": {
        "continuous_model_W": null,
        "peak_model_W": null,
        "peak_duration_s": null,
        "identity": "dynamic_conversion_or_conduction_group",
        "expression": "",
        "port": "passive_protection",
        "group_id": "P-PROTECTION",
        "separate_hardware_surge_rating_W": null
      },
      "interface_specification": "FC58.00V/60.00A；电池58.00V/60.00A；电池由BMS30.00A连续/60.00A10s包络协调",
      "registered_manufacturer_parameters": [],
      "adopted_engineering_parameters": {
        "FC_fuse_rating_A": 60.0,
        "battery_fuse_rating_A": 60.0,
        "fuse_voltage_V": 58.0,
        "coordination": "FC45.60A at2280W/50V;BMS30Acontinuous/60A10s;10AWGmain/14AWGarm;I2t not a separate numerical model input"
      },
      "budget_includes": "onefuse+holderperbranch;45gisallocationnotcataloguevalue",
      "deduplication": "single_accounting_item",
      "source_ids": [
        "R2-REF-FUSE",
        "R2-ENG"
      ],
      "source_locator": "branch overrides > original row;full source locator in original65 registry",
      "source_matlab_row": "reports/05_simulation/R23-001/runs/SIM-R3-001-he-v2/IE24_A12_P80G30_NOCHG-mass-closure.csv#B31",
      "scope": "specified hardware/engineering budget;final closed-return mission adopted separately"
    },
    {
      "bom_id": "B32",
      "record_kind": "installed_component",
      "name": "预充、反灌阻断和总线保护板",
      "subsystem": "dc_power",
      "component_id": "r2-eng-protected-power-path",
      "model_or_engineering_spec": "LM5069类预充/ORing整板：50.00V母线、功率件≥60.00V；80.00A连续/120.00A短时工程通流目标",
      "quantity": 1,
      "mass": {
        "unit_g": 80.0,
        "accounted_unit_g": 80.0,
        "accounted_total_g": 80.0,
        "accounted_total_lower_g": 50.0,
        "accounted_total_upper_g": 150.0,
        "included_in": null,
        "identity": "explicit_engineering_allocation_or_task_assumption",
        "matlab_total_kg_literal": "0.08",
        "matlab_rule": "source_or_explicit_engineering_budget",
        "normalization": "row total and bounds copied MATLAB;unit allocation total/quantity;display in g2"
      },
      "power": {
        "continuous_model_W": 0.2,
        "peak_model_W": 0.2,
        "peak_duration_s": null,
        "identity": "constant_engineering_load_budget_not_transient_rating",
        "expression": "0.2 + I_bus^2*R_protection_group;thegroupcoversB31/B32/B33once",
        "port": "conduction_protection",
        "group_id": "P-PROTECTION",
        "separate_hardware_surge_rating_W": null
      },
      "interface_specification": "控制器9–80V；50.00V母线，功率件≥60.00V；80.00A连续/120.00A10s工程目标",
      "registered_manufacturer_parameters": [],
      "adopted_engineering_parameters": {
        "continuous_current_A": 80.0,
        "peak_current_A": 120.0,
        "peak_duration_s": 10.0,
        "identity": "engineering board requirement"
      },
      "budget_includes": "board,FETs,shunt,connectors/case; not justICmass",
      "deduplication": "single_accounting_item",
      "source_ids": [
        "R2-REF-HOTSWAP",
        "R2-ENG"
      ],
      "source_locator": "branch overrides > original row;full source locator in original65 registry",
      "source_matlab_row": "reports/05_simulation/R23-001/runs/SIM-R3-001-he-v2/IE24_A12_P80G30_NOCHG-mass-closure.csv#B32",
      "scope": "specified hardware/engineering budget;final closed-return mission adopted separately"
    },
    {
      "bom_id": "B33",
      "record_kind": "installed_component",
      "name": "四推进加关键/安全/载荷分路配电",
      "subsystem": "dc_power",
      "component_id": "r2-eng-pdb4",
      "model_or_engineering_spec": "60V等级PDB：四推进及关键/安全/任务支路；80.00A连续、120.00A/10.00s工程设计",
      "quantity": 1,
      "mass": {
        "unit_g": 120.0,
        "accounted_unit_g": 120.0,
        "accounted_total_g": 120.0,
        "accounted_total_lower_g": 80.0,
        "accounted_total_upper_g": 200.0,
        "included_in": null,
        "identity": "explicit_engineering_allocation_or_task_assumption",
        "matlab_total_kg_literal": "0.12",
        "matlab_rule": "source_or_explicit_engineering_budget",
        "normalization": "row total and bounds copied MATLAB;unit allocation total/quantity;display in g2"
      },
      "power": {
        "continuous_model_W": null,
        "peak_model_W": null,
        "peak_duration_s": null,
        "identity": "dynamic_conversion_or_conduction_group",
        "expression": "branchlossoraggregateallocatedlossnotboth",
        "port": "conduction_distribution",
        "group_id": "P-PROTECTION",
        "separate_hardware_surge_rating_W": null
      },
      "interface_specification": "50.00V/60V等级；80.00A连续/120.00A10s，四推进及关键/安全/任务分支",
      "registered_manufacturer_parameters": [],
      "adopted_engineering_parameters": {
        "continuous_current_A": 80.0,
        "peak_current_A": 120.0,
        "peak_duration_s": 10.0,
        "identity": "engineering board requirement"
      },
      "budget_includes": "60gcopper/PCB+60gconnectors/covertarget;fusesB31separate",
      "deduplication": "single_accounting_item",
      "source_ids": [
        "R2-ENG"
      ],
      "source_locator": "branch overrides > original row;full source locator in original65 registry",
      "source_matlab_row": "reports/05_simulation/R23-001/runs/SIM-R3-001-he-v2/IE24_A12_P80G30_NOCHG-mass-closure.csv#B33",
      "scope": "specified hardware/engineering budget;final closed-return mission adopted separately"
    },
    {
      "bom_id": "B34",
      "record_kind": "installed_component",
      "name": "外延动力线束",
      "subsystem": "dc_power",
      "component_id": "r2-eng-hv-harness",
      "model_or_engineering_spec": "外延动力线束：10AWG主线、14AWG机臂延长，300.00g已求值工程预算",
      "quantity": 1,
      "mass": {
        "unit_g": 300.0,
        "accounted_unit_g": 300.0,
        "accounted_total_g": 300.0,
        "accounted_total_lower_g": 220.0,
        "accounted_total_upper_g": 450.0,
        "included_in": null,
        "identity": "explicit_engineering_allocation_or_task_assumption",
        "matlab_total_kg_literal": "0.3",
        "matlab_rule": "source_or_explicit_engineering_budget",
        "normalization": "row total and bounds copied MATLAB;unit allocation total/quantity;display in g2"
      },
      "power": {
        "continuous_model_W": null,
        "peak_model_W": null,
        "peak_duration_s": null,
        "identity": "dynamic_conversion_or_conduction_group",
        "expression": "",
        "port": "conduction_distribution",
        "group_id": "P-HARNESS",
        "separate_hardware_surge_rating_W": null
      },
      "interface_specification": "10AWG主线2.00m，14AWG机臂线4.40m；按FC/电池60.00A保险支路与BMS30.00A/60.00A10s协调",
      "registered_manufacturer_parameters": [],
      "adopted_engineering_parameters": {},
      "budget_includes": "mainpair2mwiretotal+armextensions4.4mwiretotalplusconnectors; notstockmotor/ESCleads;batterydisconnectandM8adaptermass now explicitlyB52,not in this budget",
      "deduplication": "single_accounting_item",
      "source_ids": [
        "R2-ENG"
      ],
      "source_locator": "branch overrides > original row;full source locator in original65 registry",
      "source_matlab_row": "reports/05_simulation/R23-001/runs/SIM-R3-001-he-v2/IE24_A12_P80G30_NOCHG-mass-closure.csv#B34",
      "scope": "specified hardware/engineering budget;final closed-return mission adopted separately"
    },
    {
      "bom_id": "B35",
      "record_kind": "installed_component",
      "name": "外延控制与传感线束",
      "subsystem": "dc_power",
      "component_id": "r2-eng-signal-harness",
      "model_or_engineering_spec": "CAN/UART/PWM/NTC/valvesignalextensionsandshielding;0.07kgallocation",
      "quantity": 1,
      "mass": {
        "unit_g": 70.0,
        "accounted_unit_g": 70.0,
        "accounted_total_g": 70.0,
        "accounted_total_lower_g": 40.0,
        "accounted_total_upper_g": 120.0,
        "included_in": null,
        "identity": "explicit_engineering_allocation_or_task_assumption",
        "matlab_total_kg_literal": "0.07",
        "matlab_rule": "source_or_explicit_engineering_budget",
        "normalization": "row total and bounds copied MATLAB;unit allocation total/quantity;display in g2"
      },
      "power": {
        "continuous_model_W": null,
        "peak_model_W": null,
        "peak_duration_s": null,
        "identity": "passive_no_independent_electrical_load",
        "expression": "无独立电功耗",
        "port": "passive",
        "group_id": "P-PASSIVE",
        "separate_hardware_surge_rating_W": null
      },
      "interface_specification": "CAN/UART/PWM/NTC/阀信号延长及屏蔽线束一套",
      "registered_manufacturer_parameters": [],
      "adopted_engineering_parameters": {},
      "budget_includes": "extensionsonly; stockmodulecablesalreadyincludednotaddedagain",
      "deduplication": "single_accounting_item",
      "source_ids": [
        "R2-ENG"
      ],
      "source_locator": "branch overrides > original row;full source locator in original65 registry",
      "source_matlab_row": "reports/05_simulation/R23-001/runs/SIM-R3-001-he-v2/IE24_A12_P80G30_NOCHG-mass-closure.csv#B35",
      "scope": "specified hardware/engineering budget;final closed-return mission adopted separately"
    },
    {
      "bom_id": "B36",
      "record_kind": "installed_component",
      "name": "航电稳压与电压电流计量",
      "subsystem": "avionics_power",
      "component_id": "holybro-pm08-can",
      "model_or_engineering_spec": "PM08-CAN,7–60V200Amonitor,5.2V3ABEC",
      "quantity": 1,
      "mass": {
        "unit_g": 185.0,
        "accounted_unit_g": 185.0,
        "accounted_total_g": 185.0,
        "accounted_total_lower_g": 185.0,
        "accounted_total_upper_g": 185.0,
        "included_in": null,
        "identity": "manufacturer_point_value_no_claim_of_zero_uncertainty",
        "matlab_total_kg_literal": "0.185",
        "matlab_rule": "source_or_explicit_engineering_budget",
        "normalization": "row total and bounds copied MATLAB;unit allocation total/quantity;display in g2"
      },
      "power": {
        "continuous_model_W": null,
        "peak_model_W": null,
        "peak_duration_s": null,
        "identity": "dynamic_conversion_or_conduction_group",
        "expression": "P_5p2_load/eta_5p2;outputcapability15.6Wnotownload",
        "port": "regulated_branch",
        "group_id": "P-PASSIVE",
        "separate_hardware_surge_rating_W": null
      },
      "interface_specification": "PM08-CAN：7–60V、200A计量；5.20V/3.00A输出",
      "registered_manufacturer_parameters": [
        {
          "parameter": "module_mass_including_cables",
          "raw_value": "185",
          "raw_unit": "g",
          "source_locator": "PM08-CAN and PM06D tables",
          "record_id": "R2-0189",
          "source_id": "R2-REF-PM"
        },
        {
          "parameter": "input_voltage_max",
          "raw_value": "60",
          "raw_unit": "V",
          "source_locator": "PM08-CAN and PM06D tables",
          "record_id": "R2-0190",
          "source_id": "R2-REF-PM"
        },
        {
          "parameter": "continuous_current",
          "raw_value": "200",
          "raw_unit": "A",
          "source_locator": "PM08-CAN and PM06D tables",
          "record_id": "R2-0191",
          "source_id": "R2-REF-PM"
        },
        {
          "parameter": "regulated_output_voltage",
          "raw_value": "5.2",
          "raw_unit": "V",
          "source_locator": "PM08-CAN and PM06D tables",
          "record_id": "R2-0192",
          "source_id": "R2-REF-PM"
        },
        {
          "parameter": "regulated_output_current_max",
          "raw_value": "3",
          "raw_unit": "A",
          "source_locator": "PM08-CAN and PM06D tables",
          "record_id": "R2-0193",
          "source_id": "R2-REF-PM"
        }
      ],
      "adopted_engineering_parameters": {},
      "budget_includes": "originalcablesincluded;notcompletePDB",
      "deduplication": "single_accounting_item",
      "source_ids": [
        "R2-REF-PM"
      ],
      "source_locator": "branch overrides > original row;full source locator in original65 registry",
      "source_matlab_row": "reports/05_simulation/R23-001/runs/SIM-R3-001-he-v2/IE24_A12_P80G30_NOCHG-mass-closure.csv#B36",
      "scope": "specified hardware/engineering budget;final closed-return mission adopted separately"
    },
    {
      "bom_id": "B37",
      "record_kind": "installed_component",
      "name": "十二伏辅助稳压板",
      "subsystem": "safety_power",
      "component_id": "pololu-d42v55f12",
      "model_or_engineering_spec": "D42V55F12item5577,12–60Vinput/12Voutput",
      "quantity": 1,
      "mass": {
        "unit_g": 6.5,
        "accounted_unit_g": 6.5,
        "accounted_total_g": 6.5,
        "accounted_total_lower_g": 6.5,
        "accounted_total_upper_g": 6.5,
        "included_in": null,
        "identity": "manufacturer_point_value_no_claim_of_zero_uncertainty",
        "matlab_total_kg_literal": "0.0065",
        "matlab_rule": "source_or_explicit_engineering_budget",
        "normalization": "row total and bounds copied MATLAB;unit allocation total/quantity;display in g2"
      },
      "power": {
        "continuous_model_W": null,
        "peak_model_W": null,
        "peak_duration_s": null,
        "identity": "dynamic_conversion_or_conduction_group",
        "expression": "P_12V_load/eta_12V",
        "port": "regulated_branch",
        "group_id": "P-PASSIVE",
        "separate_hardware_surge_rating_W": null
      },
      "interface_specification": "Pololu D42V55F12 #5577：12–60V输入、12.00V输出",
      "registered_manufacturer_parameters": [],
      "adopted_engineering_parameters": {},
      "budget_includes": "bareassembledboard;coverinB39",
      "deduplication": "single_accounting_item",
      "source_ids": [
        "R2-REF-12V"
      ],
      "source_locator": "branch overrides > original row;full source locator in original65 registry",
      "source_matlab_row": "reports/05_simulation/R23-001/runs/SIM-R3-001-he-v2/IE24_A12_P80G30_NOCHG-mass-closure.csv#B37",
      "scope": "specified hardware/engineering budget;final closed-return mission adopted separately"
    },
    {
      "bom_id": "B38",
      "record_kind": "installed_component",
      "name": "独立五伏安全稳压板",
      "subsystem": "safety_power",
      "component_id": "pololu-d42v55f5",
      "model_or_engineering_spec": "D42V55F5item5571,60Vclass5Vregulator;10gconservativeinstalledboardallocation",
      "quantity": 1,
      "mass": {
        "unit_g": 10.0,
        "accounted_unit_g": 10.0,
        "accounted_total_g": 10.0,
        "accounted_total_lower_g": 6.5,
        "accounted_total_upper_g": 20.0,
        "included_in": null,
        "identity": "explicit_engineering_allocation_or_task_assumption",
        "matlab_total_kg_literal": "0.01",
        "matlab_rule": "source_or_explicit_engineering_budget",
        "normalization": "row total and bounds copied MATLAB;unit allocation total/quantity;display in g2"
      },
      "power": {
        "continuous_model_W": null,
        "peak_model_W": null,
        "peak_duration_s": null,
        "identity": "dynamic_conversion_or_conduction_group",
        "expression": "P_5V_safety_load/eta_5V",
        "port": "regulated_branch",
        "group_id": "P-PASSIVE",
        "separate_hardware_surge_rating_W": null
      },
      "interface_specification": "Pololu D42V55F5 #5571：60V等级输入、5.00V输出",
      "registered_manufacturer_parameters": [],
      "adopted_engineering_parameters": {},
      "budget_includes": "board/headersbudget,coverinB39",
      "deduplication": "single_accounting_item",
      "source_ids": [
        "R2-REF-5V",
        "R2-ENG"
      ],
      "source_locator": "branch overrides > original row;full source locator in original65 registry",
      "source_matlab_row": "reports/05_simulation/R23-001/runs/SIM-R3-001-he-v2/IE24_A12_P80G30_NOCHG-mass-closure.csv#B38",
      "scope": "specified hardware/engineering budget;final closed-return mission adopted separately"
    },
    {
      "bom_id": "B39",
      "record_kind": "installed_component",
      "name": "裸板保护、绝缘、散热与应力释放",
      "subsystem": "dc_power",
      "component_id": "r2-eng-converter-mounts",
      "model_or_engineering_spec": "convertercovers,insulation,heatspreaderandstrainrelief;50gallocation",
      "quantity": 1,
      "mass": {
        "unit_g": 50.0,
        "accounted_unit_g": 50.0,
        "accounted_total_g": 50.0,
        "accounted_total_lower_g": 30.0,
        "accounted_total_upper_g": 100.0,
        "included_in": null,
        "identity": "explicit_engineering_allocation_or_task_assumption",
        "matlab_total_kg_literal": "0.05",
        "matlab_rule": "source_or_explicit_engineering_budget",
        "normalization": "row total and bounds copied MATLAB;unit allocation total/quantity;display in g2"
      },
      "power": {
        "continuous_model_W": null,
        "peak_model_W": null,
        "peak_duration_s": null,
        "identity": "passive_no_independent_electrical_load",
        "expression": "无独立电功耗",
        "port": "passive",
        "group_id": "P-PASSIVE",
        "separate_hardware_surge_rating_W": null
      },
      "interface_specification": "稳压板保护/绝缘/热扩散/应力释放，50.00g一套",
      "registered_manufacturer_parameters": [],
      "adopted_engineering_parameters": {},
      "budget_includes": "onlyexternalpartsnotinB32/B33cases",
      "deduplication": "single_accounting_item",
      "source_ids": [
        "R2-ENG"
      ],
      "source_locator": "branch overrides > original row;full source locator in original65 registry",
      "source_matlab_row": "reports/05_simulation/R23-001/runs/SIM-R3-001-he-v2/IE24_A12_P80G30_NOCHG-mass-closure.csv#B39",
      "scope": "specified hardware/engineering budget;final closed-return mission adopted separately"
    },
    {
      "bom_id": "B40",
      "record_kind": "installed_component",
      "name": "飞控计算与惯性测量模块",
      "subsystem": "flight_control",
      "component_id": "holybro-pixhawk6x-module",
      "model_or_engineering_spec": "Pixhawk6Xmodule",
      "quantity": 1,
      "mass": {
        "unit_g": 23.0,
        "accounted_unit_g": 23.0,
        "accounted_total_g": 23.0,
        "accounted_total_lower_g": 23.0,
        "accounted_total_upper_g": 23.0,
        "included_in": null,
        "identity": "manufacturer_point_value_no_claim_of_zero_uncertainty",
        "matlab_total_kg_literal": "0.023",
        "matlab_rule": "source_or_explicit_engineering_budget",
        "normalization": "row total and bounds copied MATLAB;unit allocation total/quantity;display in g2"
      },
      "power": {
        "continuous_model_W": 5.0,
        "peak_model_W": 5.0,
        "peak_duration_s": null,
        "identity": "constant_engineering_load_budget_not_transient_rating",
        "expression": "",
        "port": "regulated5.2V_output",
        "group_id": "P-5P2",
        "separate_hardware_surge_rating_W": null
      },
      "interface_specification": "Pixhawk6X模块；≤6.00V，按5.20V供电",
      "registered_manufacturer_parameters": [
        {
          "parameter": "module_mass",
          "raw_value": "23",
          "raw_unit": "g",
          "source_locator": "Mechanical data / Electrical data",
          "record_id": "R2-0187",
          "source_id": "R2-REF-6X"
        }
      ],
      "adopted_engineering_parameters": {},
      "budget_includes": "moduleonly;baseB41",
      "deduplication": "single_accounting_item",
      "source_ids": [
        "R2-REF-6X"
      ],
      "source_locator": "branch overrides > original row;full source locator in original65 registry",
      "source_matlab_row": "reports/05_simulation/R23-001/runs/SIM-R3-001-he-v2/IE24_A12_P80G30_NOCHG-mass-closure.csv#B40",
      "scope": "specified hardware/engineering budget;final closed-return mission adopted separately"
    },
    {
      "bom_id": "B41",
      "record_kind": "installed_component",
      "name": "飞控匹配底板",
      "subsystem": "flight_control",
      "component_id": "holybro-pixhawk-mini-base",
      "model_or_engineering_spec": "Pixhawkmini-baseboard",
      "quantity": 1,
      "mass": {
        "unit_g": 26.5,
        "accounted_unit_g": 26.5,
        "accounted_total_g": 26.5,
        "accounted_total_lower_g": 26.5,
        "accounted_total_upper_g": 26.5,
        "included_in": null,
        "identity": "manufacturer_point_value_no_claim_of_zero_uncertainty",
        "matlab_total_kg_literal": "0.0265",
        "matlab_rule": "source_or_explicit_engineering_budget",
        "normalization": "row total and bounds copied MATLAB;unit allocation total/quantity;display in g2"
      },
      "power": {
        "continuous_model_W": null,
        "peak_model_W": null,
        "peak_duration_s": null,
        "identity": "power_included_in_B40",
        "expression": "功耗归B40；质量独立计入",
        "port": "passive",
        "group_id": "P-5P2",
        "separate_hardware_surge_rating_W": null
      },
      "interface_specification": "Pixhawk mini底板，功耗归B40",
      "registered_manufacturer_parameters": [
        {
          "parameter": "baseboard_mass",
          "raw_value": "26.5",
          "raw_unit": "g",
          "source_locator": "Mechanical data / Electrical data",
          "record_id": "R2-0188",
          "source_id": "R2-REF-6X"
        }
      ],
      "adopted_engineering_parameters": {},
      "budget_includes": "baseonly;passive/logicloadscoveredinB40",
      "deduplication": "powerincludedinB40",
      "source_ids": [
        "R2-REF-6X"
      ],
      "source_locator": "branch overrides > original row;full source locator in original65 registry",
      "source_matlab_row": "reports/05_simulation/R23-001/runs/SIM-R3-001-he-v2/IE24_A12_P80G30_NOCHG-mass-closure.csv#B41",
      "scope": "specified hardware/engineering budget;final closed-return mission adopted separately"
    },
    {
      "bom_id": "B42",
      "record_kind": "installed_component",
      "name": "卫星导航与罗盘",
      "subsystem": "navigation",
      "component_id": "holybro-dronecan-m9n",
      "model_or_engineering_spec": "DroneCANM9NSKU12032",
      "quantity": 1,
      "mass": {
        "unit_g": 36.0,
        "accounted_unit_g": 36.0,
        "accounted_total_g": 36.0,
        "accounted_total_lower_g": 36.0,
        "accounted_total_upper_g": 36.0,
        "included_in": null,
        "identity": "manufacturer_point_value_no_claim_of_zero_uncertainty",
        "matlab_total_kg_literal": "0.036",
        "matlab_rule": "source_or_explicit_engineering_budget",
        "normalization": "row total and bounds copied MATLAB;unit allocation total/quantity;display in g2"
      },
      "power": {
        "continuous_model_W": 1.0,
        "peak_model_W": 1.0,
        "peak_duration_s": null,
        "identity": "constant_engineering_load_budget_not_transient_rating",
        "expression": "",
        "port": "regulated5.2V_output",
        "group_id": "P-5P2",
        "separate_hardware_surge_rating_W": null
      },
      "interface_specification": "DroneCAN M9N SKU12032，4.70–5.20V",
      "registered_manufacturer_parameters": [],
      "adopted_engineering_parameters": {},
      "budget_includes": "receiver/antenna;mountB44",
      "deduplication": "single_accounting_item",
      "source_ids": [
        "R2-REF-GPS"
      ],
      "source_locator": "branch overrides > original row;full source locator in original65 registry",
      "source_matlab_row": "reports/05_simulation/R23-001/runs/SIM-R3-001-he-v2/IE24_A12_P80G30_NOCHG-mass-closure.csv#B42",
      "scope": "specified hardware/engineering budget;final closed-return mission adopted separately"
    },
    {
      "bom_id": "B43",
      "record_kind": "installed_component",
      "name": "空中数传模块与天线",
      "subsystem": "communication",
      "component_id": "holybro-sik-v3-100mw",
      "model_or_engineering_spec": "SiK Telemetry V3 100mW级空中端，433MHz工程频段配置，含天线",
      "quantity": 1,
      "mass": {
        "unit_g": 23.5,
        "accounted_unit_g": 23.5,
        "accounted_total_g": 23.5,
        "accounted_total_lower_g": 23.5,
        "accounted_total_upper_g": 23.5,
        "included_in": null,
        "identity": "manufacturer_point_value_no_claim_of_zero_uncertainty",
        "matlab_total_kg_literal": "0.0235",
        "matlab_rule": "source_or_explicit_engineering_budget",
        "normalization": "row total and bounds copied MATLAB;unit allocation total/quantity;display in g2"
      },
      "power": {
        "continuous_model_W": 0.5,
        "peak_model_W": 0.5,
        "peak_duration_s": null,
        "identity": "constant_engineering_load_budget_not_transient_rating",
        "expression": "",
        "port": "regulated5.2V_output",
        "group_id": "P-5P2",
        "separate_hardware_surge_rating_W": null
      },
      "interface_specification": "433MHz工程配置；100mW射频型号等级，5.00V供电、0.50W电负载预算",
      "registered_manufacturer_parameters": [],
      "adopted_engineering_parameters": {
        "frequency_MHz": 433,
        "identity": "engineering configuration,not a new manufacturer or regulatory claim"
      },
      "budget_includes": "airmodule+antennaonly;groundunitexcludedfromaircraft",
      "deduplication": "single_accounting_item",
      "source_ids": [
        "R2-REF-RADIO",
        "R2-ENG"
      ],
      "source_locator": "branch overrides > original row;full source locator in original65 registry",
      "source_matlab_row": "reports/05_simulation/R23-001/runs/SIM-R3-001-he-v2/IE24_A12_P80G30_NOCHG-mass-closure.csv#B43",
      "scope": "specified hardware/engineering budget;final closed-return mission adopted separately"
    },
    {
      "bom_id": "B44",
      "record_kind": "installed_component",
      "name": "导航、飞控及通信安装件",
      "subsystem": "navigation",
      "component_id": "r2-eng-avionics-mount",
      "model_or_engineering_spec": "GNSSmast,FCvibrationisolation,radioattach;60gallocation",
      "quantity": 1,
      "mass": {
        "unit_g": 60.0,
        "accounted_unit_g": 60.0,
        "accounted_total_g": 60.0,
        "accounted_total_lower_g": 40.0,
        "accounted_total_upper_g": 100.0,
        "included_in": null,
        "identity": "explicit_engineering_allocation_or_task_assumption",
        "matlab_total_kg_literal": "0.06",
        "matlab_rule": "source_or_explicit_engineering_budget",
        "normalization": "row total and bounds copied MATLAB;unit allocation total/quantity;display in g2"
      },
      "power": {
        "continuous_model_W": null,
        "peak_model_W": null,
        "peak_duration_s": null,
        "identity": "passive_no_independent_electrical_load",
        "expression": "无独立电功耗",
        "port": "passive",
        "group_id": "P-PASSIVE",
        "separate_hardware_surge_rating_W": null
      },
      "interface_specification": "导航桅杆、飞控减振及数传安装件一套",
      "registered_manufacturer_parameters": [],
      "adopted_engineering_parameters": {},
      "budget_includes": "GPS/FCmountsonlynotstructureB08",
      "deduplication": "single_accounting_item",
      "source_ids": [
        "R2-ENG"
      ],
      "source_locator": "branch overrides > original row;full source locator in original65 registry",
      "source_matlab_row": "reports/05_simulation/R23-001/runs/SIM-R3-001-he-v2/IE24_A12_P80G30_NOCHG-mass-closure.csv#B44",
      "scope": "specified hardware/engineering budget;final closed-return mission adopted separately"
    },
    {
      "bom_id": "B45",
      "record_kind": "installed_component",
      "name": "外部能量管理控制器",
      "subsystem": "control",
      "component_id": "r2-eng-ems-can-node",
      "model_or_engineering_spec": "CAN/UARThostwithwatchdog,FCstatus/BMS/SOCandload-shedlogic;50g/2Wbudget",
      "quantity": 1,
      "mass": {
        "unit_g": 50.0,
        "accounted_unit_g": 50.0,
        "accounted_total_g": 50.0,
        "accounted_total_lower_g": 30.0,
        "accounted_total_upper_g": 100.0,
        "included_in": null,
        "identity": "explicit_engineering_allocation_or_task_assumption",
        "matlab_total_kg_literal": "0.05",
        "matlab_rule": "source_or_explicit_engineering_budget",
        "normalization": "row total and bounds copied MATLAB;unit allocation total/quantity;display in g2"
      },
      "power": {
        "continuous_model_W": 2.0,
        "peak_model_W": 2.0,
        "peak_duration_s": null,
        "identity": "constant_engineering_load_budget_not_transient_rating",
        "expression": "",
        "port": "regulated5V_safety_output",
        "group_id": "P-SAFETY5",
        "separate_hardware_surge_rating_W": null
      },
      "interface_specification": "EMS CAN/UART主机与看门狗，5.00V",
      "registered_manufacturer_parameters": [],
      "adopted_engineering_parameters": {},
      "budget_includes": "completehostboardandcase;notFCinternalcontroller",
      "deduplication": "single_accounting_item",
      "source_ids": [
        "R2-ENG"
      ],
      "source_locator": "branch overrides > original row;full source locator in original65 registry",
      "source_matlab_row": "reports/05_simulation/R23-001/runs/SIM-R3-001-he-v2/IE24_A12_P80G30_NOCHG-mass-closure.csv#B45",
      "scope": "specified hardware/engineering budget;final closed-return mission adopted separately"
    },
    {
      "bom_id": "B46",
      "record_kind": "installed_component",
      "name": "外部电池/风道温度监测",
      "subsystem": "sensors",
      "component_id": "r2-eng-temperature-kit",
      "model_or_engineering_spec": "twoNTCsensorsplusconditioner,target20gset/0.2W",
      "quantity": 1,
      "mass": {
        "unit_g": 20.0,
        "accounted_unit_g": 20.0,
        "accounted_total_g": 20.0,
        "accounted_total_lower_g": 10.0,
        "accounted_total_upper_g": 40.0,
        "included_in": null,
        "identity": "explicit_engineering_allocation_or_task_assumption",
        "matlab_total_kg_literal": "0.02",
        "matlab_rule": "source_or_explicit_engineering_budget",
        "normalization": "row total and bounds copied MATLAB;unit allocation total/quantity;display in g2"
      },
      "power": {
        "continuous_model_W": 0.2,
        "peak_model_W": 0.2,
        "peak_duration_s": null,
        "identity": "constant_engineering_load_budget_not_transient_rating",
        "expression": "",
        "port": "regulated5V_safety_output",
        "group_id": "P-SAFETY5",
        "separate_hardware_surge_rating_W": null
      },
      "interface_specification": "两只NTC及调理器，5.00V",
      "registered_manufacturer_parameters": [],
      "adopted_engineering_parameters": {},
      "budget_includes": "externalbattery/ductsensorsnotinternalFCsensors",
      "deduplication": "single_accounting_item",
      "source_ids": [
        "R2-ENG"
      ],
      "source_locator": "branch overrides > original row;full source locator in original65 registry",
      "source_matlab_row": "reports/05_simulation/R23-001/runs/SIM-R3-001-he-v2/IE24_A12_P80G30_NOCHG-mass-closure.csv#B46",
      "scope": "specified hardware/engineering budget;final closed-return mission adopted separately"
    },
    {
      "bom_id": "B47",
      "record_kind": "installed_component",
      "name": "巡检测绘任务载荷设计工况",
      "subsystem": "mission_payload",
      "component_id": "r2-eng-payload-proposal",
      "model_or_engineering_spec": "巡检测绘研究载荷：1.00kg、12.00V、20.00W",
      "quantity": 1,
      "mass": {
        "unit_g": 1000.0,
        "accounted_unit_g": 1000.0,
        "accounted_total_g": 1000.0,
        "accounted_total_lower_g": 1000.0,
        "accounted_total_upper_g": 1000.0,
        "included_in": null,
        "identity": "explicit_engineering_allocation_or_task_assumption",
        "matlab_total_kg_literal": "1",
        "matlab_rule": "source_or_explicit_engineering_budget",
        "normalization": "row total and bounds copied MATLAB;unit allocation total/quantity;display in g2"
      },
      "power": {
        "continuous_model_W": 20.0,
        "peak_model_W": 20.0,
        "peak_duration_s": null,
        "identity": "constant_engineering_load_budget_not_transient_rating",
        "expression": "",
        "port": "regulated12V_output",
        "group_id": "P-AUX12",
        "separate_hardware_surge_rating_W": null
      },
      "interface_specification": "巡检测绘研究载荷，1.00kg、12.00V、20.00W",
      "registered_manufacturer_parameters": [],
      "adopted_engineering_parameters": {},
      "budget_includes": "payloadincludesgimbal/missionprocessorbyproposal;notaspecificproduct",
      "deduplication": "single_accounting_item",
      "source_ids": [
        "R2-REF-R1",
        "R2-ENG"
      ],
      "source_locator": "branch overrides > original row;full source locator in original65 registry",
      "source_matlab_row": "reports/05_simulation/R23-001/runs/SIM-R3-001-he-v2/IE24_A12_P80G30_NOCHG-mass-closure.csv#B47",
      "scope": "specified hardware/engineering budget;final closed-return mission adopted separately"
    },
    {
      "bom_id": "B48",
      "record_kind": "installed_component",
      "name": "可切除任务负载开关",
      "subsystem": "mission_payload",
      "component_id": "r2-eng-payload-load-switch",
      "model_or_engineering_spec": "60Vclassswitchand12Vpayloadconnector,25g/0.3Wbudget",
      "quantity": 1,
      "mass": {
        "unit_g": 25.0,
        "accounted_unit_g": 25.0,
        "accounted_total_g": 25.0,
        "accounted_total_lower_g": 15.0,
        "accounted_total_upper_g": 50.0,
        "included_in": null,
        "identity": "explicit_engineering_allocation_or_task_assumption",
        "matlab_total_kg_literal": "0.025",
        "matlab_rule": "source_or_explicit_engineering_budget",
        "normalization": "row total and bounds copied MATLAB;unit allocation total/quantity;display in g2"
      },
      "power": {
        "continuous_model_W": 0.3,
        "peak_model_W": 0.3,
        "peak_duration_s": null,
        "identity": "constant_engineering_load_budget_not_transient_rating",
        "expression": "",
        "port": "regulated12V_output",
        "group_id": "P-AUX12",
        "separate_hardware_surge_rating_W": null
      },
      "interface_specification": "60V等级开关/12.00V任务分支及连接器",
      "registered_manufacturer_parameters": [],
      "adopted_engineering_parameters": {},
      "budget_includes": "loadswitch/connectornotpayloadunit",
      "deduplication": "single_accounting_item",
      "source_ids": [
        "R2-REF-HOTSWAP",
        "R2-ENG"
      ],
      "source_locator": "branch overrides > original row;full source locator in original65 registry",
      "source_matlab_row": "reports/05_simulation/R23-001/runs/SIM-R3-001-he-v2/IE24_A12_P80G30_NOCHG-mass-closure.csv#B48",
      "scope": "specified hardware/engineering budget;final closed-return mission adopted separately"
    },
    {
      "bom_id": "B49",
      "record_kind": "installed_component",
      "name": "防护、绑扎、标识与边缘保护",
      "subsystem": "aircraft_finish",
      "component_id": "r2-eng-protection-kit",
      "model_or_engineering_spec": "rainshields,labels,retentiontiesandedgeprotection;100gallocation",
      "quantity": 1,
      "mass": {
        "unit_g": 100.0,
        "accounted_unit_g": 100.0,
        "accounted_total_g": 100.0,
        "accounted_total_lower_g": 60.0,
        "accounted_total_upper_g": 200.0,
        "included_in": null,
        "identity": "explicit_engineering_allocation_or_task_assumption",
        "matlab_total_kg_literal": "0.1",
        "matlab_rule": "source_or_explicit_engineering_budget",
        "normalization": "row total and bounds copied MATLAB;unit allocation total/quantity;display in g2"
      },
      "power": {
        "continuous_model_W": null,
        "peak_model_W": null,
        "peak_duration_s": null,
        "identity": "passive_no_independent_electrical_load",
        "expression": "无独立电功耗",
        "port": "passive",
        "group_id": "P-PASSIVE",
        "separate_hardware_surge_rating_W": null
      },
      "interface_specification": "防护、绑扎、标识与边缘保护一套",
      "registered_manufacturer_parameters": [],
      "adopted_engineering_parameters": {},
      "budget_includes": "excludesmodulecasesandstructuralfasteners",
      "deduplication": "single_accounting_item",
      "source_ids": [
        "R2-ENG"
      ],
      "source_locator": "branch overrides > original row;full source locator in original65 registry",
      "source_matlab_row": "reports/05_simulation/R23-001/runs/SIM-R3-001-he-v2/IE24_A12_P80G30_NOCHG-mass-closure.csv#B49",
      "scope": "specified hardware/engineering budget;final closed-return mission adopted separately"
    },
    {
      "bom_id": "B51",
      "record_kind": "installed_component",
      "name": "尚未包含的瓶侧安全/加注附件预算",
      "subsystem": "integration_additions",
      "component_id": "r2-eng-cylinder-safety-kit",
      "model_or_engineering_spec": "Allowance for cylinder-side self-closing valve/pressure-relief/fill interface not already in selected cylinder or HFLW regulator",
      "quantity": 1,
      "mass": {
        "unit_g": 120.0,
        "accounted_unit_g": 120.0,
        "accounted_total_g": 120.0,
        "accounted_total_lower_g": 60.0,
        "accounted_total_upper_g": 250.0,
        "included_in": null,
        "identity": "explicit_engineering_allocation_or_task_assumption",
        "matlab_total_kg_literal": "0.12",
        "matlab_rule": "source_or_explicit_engineering_budget",
        "normalization": "row total and bounds copied MATLAB;unit allocation total/quantity;display in g2"
      },
      "power": {
        "continuous_model_W": null,
        "peak_model_W": null,
        "peak_duration_s": null,
        "identity": "passive_no_independent_electrical_load",
        "expression": "无独立电功耗",
        "port": "passive",
        "group_id": "P-PASSIVE",
        "separate_hardware_surge_rating_W": null
      },
      "interface_specification": "瓶侧关断/泄压/加注未含部分，120.00g独立预算",
      "registered_manufacturer_parameters": [],
      "adopted_engineering_parameters": {},
      "budget_includes": "Allowance for cylinder-side self-closing valve/pressure-relief/fill interface not already in selected cylinder or HFLW regulator",
      "deduplication": "single_accounting_item",
      "source_ids": [
        "R2-REF-IE-MANUAL",
        "R2-ENG"
      ],
      "source_locator": "branch overrides > original row;full source locator in original65 registry",
      "source_matlab_row": "reports/05_simulation/R23-001/runs/SIM-R3-001-he-v2/IE24_A12_P80G30_NOCHG-mass-closure.csv#B51",
      "scope": "specified hardware/engineering budget;final closed-return mission adopted separately"
    },
    {
      "bom_id": "B52",
      "record_kind": "installed_component",
      "name": "电池隔离接插件与M8端子适配",
      "subsystem": "integration_additions",
      "component_id": "r2-eng-as150-disconnect",
      "model_or_engineering_spec": "Battery-side isolation connector withM8 ring adapters and strain relief;AS150 class perIE manual",
      "quantity": 1,
      "mass": {
        "unit_g": 35.0,
        "accounted_unit_g": 35.0,
        "accounted_total_g": 35.0,
        "accounted_total_lower_g": 20.0,
        "accounted_total_upper_g": 60.0,
        "included_in": null,
        "identity": "explicit_engineering_allocation_or_task_assumption",
        "matlab_total_kg_literal": "0.035",
        "matlab_rule": "source_or_explicit_engineering_budget",
        "normalization": "row total and bounds copied MATLAB;unit allocation total/quantity;display in g2"
      },
      "power": {
        "continuous_model_W": null,
        "peak_model_W": null,
        "peak_duration_s": null,
        "identity": "passive_no_independent_electrical_load",
        "expression": "无独立电功耗",
        "port": "passive",
        "group_id": "P-PASSIVE",
        "separate_hardware_surge_rating_W": null
      },
      "interface_specification": "电池AS150等级隔离接插件、M8端子及应力释放",
      "registered_manufacturer_parameters": [],
      "adopted_engineering_parameters": {},
      "budget_includes": "Battery-side isolation connector withM8 ring adapters and strain relief;AS150 class perIE manual",
      "deduplication": "single_accounting_item",
      "source_ids": [
        "R2-REF-IE-MANUAL",
        "R2-ENG"
      ],
      "source_locator": "branch overrides > original row;full source locator in original65 registry",
      "source_matlab_row": "reports/05_simulation/R23-001/runs/SIM-R3-001-he-v2/IE24_A12_P80G30_NOCHG-mass-closure.csv#B52",
      "scope": "specified hardware/engineering budget;final closed-return mission adopted separately"
    }
  ],
  "excluded_rows": {
    "B50": "no_inflight_charge;notinstalled",
    "C01-C08": "hypothetical/research cryogenic comparison only"
  },
  "subsystem_mass_budget": [
    {
      "subsystem": "structure",
      "accounted_mass_g": 2588.15,
      "identity": "mechanical grouping of evaluated MATLAB rows,not a new physical run"
    },
    {
      "subsystem": "propulsion",
      "accounted_mass_g": 3424.0,
      "identity": "mechanical grouping of evaluated MATLAB rows,not a new physical run"
    },
    {
      "subsystem": "fuel_cell",
      "accounted_mass_g": 4944.0,
      "identity": "mechanical grouping of evaluated MATLAB rows,not a new physical run"
    },
    {
      "subsystem": "hydrogen_storage",
      "accounted_mass_g": 4584.0,
      "identity": "mechanical grouping of evaluated MATLAB rows,not a new physical run"
    },
    {
      "subsystem": "hydrogen_supply",
      "accounted_mass_g": 609.2,
      "identity": "mechanical grouping of evaluated MATLAB rows,not a new physical run"
    },
    {
      "subsystem": "hydrogen_safety",
      "accounted_mass_g": 75.0,
      "identity": "mechanical grouping of evaluated MATLAB rows,not a new physical run"
    },
    {
      "subsystem": "hybrid_battery",
      "accounted_mass_g": 1092.0,
      "identity": "mechanical grouping of evaluated MATLAB rows,not a new physical run"
    },
    {
      "subsystem": "dc_power",
      "accounted_mass_g": 710.0,
      "identity": "mechanical grouping of evaluated MATLAB rows,not a new physical run"
    },
    {
      "subsystem": "avionics_power",
      "accounted_mass_g": 185.0,
      "identity": "mechanical grouping of evaluated MATLAB rows,not a new physical run"
    },
    {
      "subsystem": "safety_power",
      "accounted_mass_g": 16.5,
      "identity": "mechanical grouping of evaluated MATLAB rows,not a new physical run"
    },
    {
      "subsystem": "flight_control",
      "accounted_mass_g": 49.5,
      "identity": "mechanical grouping of evaluated MATLAB rows,not a new physical run"
    },
    {
      "subsystem": "navigation",
      "accounted_mass_g": 96.0,
      "identity": "mechanical grouping of evaluated MATLAB rows,not a new physical run"
    },
    {
      "subsystem": "communication",
      "accounted_mass_g": 23.5,
      "identity": "mechanical grouping of evaluated MATLAB rows,not a new physical run"
    },
    {
      "subsystem": "control",
      "accounted_mass_g": 50.0,
      "identity": "mechanical grouping of evaluated MATLAB rows,not a new physical run"
    },
    {
      "subsystem": "sensors",
      "accounted_mass_g": 20.0,
      "identity": "mechanical grouping of evaluated MATLAB rows,not a new physical run"
    },
    {
      "subsystem": "mission_payload",
      "accounted_mass_g": 1025.0,
      "identity": "mechanical grouping of evaluated MATLAB rows,not a new physical run"
    },
    {
      "subsystem": "aircraft_finish",
      "accounted_mass_g": 100.0,
      "identity": "mechanical grouping of evaluated MATLAB rows,not a new physical run"
    },
    {
      "subsystem": "integration_additions",
      "accounted_mass_g": 155.0,
      "identity": "mechanical grouping of evaluated MATLAB rows,not a new physical run"
    }
  ],
  "system_parameters": {
    "complete_mass_kg": 19.75,
    "complete_mass_source_literal_kg": "19.746854",
    "no_extra_payload_mass_kg": 18.75,
    "payload_kg": 1.0,
    "payload_power_W": 20.0,
    "bus_voltage_V": 50.0,
    "FC_nominal_W": 2400.0,
    "FC_adopted_net_cap_W": 2280.0,
    "motor_each_continuous_W": 600.0,
    "motor_each_peak_W": 1800.0,
    "motor_peak_duration_s": 10.0,
    "buffer_series_cells": 12,
    "buffer_capacity_Ah": 3.3,
    "SOC_initial_percent": 80.0,
    "SOC_floor_percent": 25.0,
    "OEM_charge_A": 0.0,
    "OEM_fallback_charge_A": 0.0,
    "propeller_diameter_mm": 762.0,
    "cylinder_volume_L": 12.0,
    "cylinder_pressure_bar": 350.0,
    "initial_catalogue_H2_g": 284.0,
    "final_H2_reserve_fraction_percent": 5.0,
    "static_hover_bus_W": 2022.02,
    "static_hover_each_motor_W": 490.99,
    "static_FC_hover_margin_W": 257.98,
    "power_screen_MTOW_kg": 21.52,
    "liftoff10s_MTOW_kg": 30.79
  },
  "final_range_mission": {
    "status": "accepted_R23-HE2.1.0_RANGE-1.0.0",
    "model_version": "R23-HE2.1.0",
    "speed_m_s": 20.0,
    "single_leg_s": 5460.0,
    "total_closed_route_km": 218.4,
    "one_way_distance_km": 109.2,
    "return_radius_km": 109.2,
    "flight_s": 11185.0,
    "flight_min": 186.42,
    "SOC_end_percent": 75.55,
    "SOC_min_percent": 75.55,
    "H2_final_g": 14.52,
    "FC_peak_W": 2280.0,
    "motor_each_peak_W": 631.72,
    "motor_over_continuous_s": 10.0,
    "battery_bus_peak_W": 598.89,
    "cruise_FC_margin_W": 844.81,
    "cruise_motor_continuous_margin_each_W": 253.21,
    "power_pass": true,
    "SOC_pass": true,
    "H2_reserve_pass": true,
    "termination": "completed_with_reserves",
    "next_single_leg_s": 5490,
    "next_single_leg_reason": "H2_reserve_constraint",
    "distance_definition": "horizontal round trip=2*airspeed*single_leg_time; zero wind; radius=airspeed*single_leg_time",
    "speed_domain_m_s": [
      5,
      20
    ],
    "not_substituted_with_repeated_work_path": true,
    "source_file": "reports/05_simulation/R23-001/range-supplement/summary.json",
    "source_pointer": "/selected/search",
    "source_sha256": "9be79b6a540fdffb5012aa068ba69150ea1203970c4916a1fd1b0ecb055ea22d"
  },
  "component_completion": {
    "active_accounting_rows": 51,
    "included_parent_function_rows": [
      "B14",
      "B15",
      "B20"
    ],
    "optional_B50_excluded": true,
    "B31_protective_current_selection": "FC58V60A;buffer58V60A;coordinated with model BMS30Acontinuous/60A10s;I2t not independently parameterized",
    "unreported_hardware_transient_ratings": "not substituted by zero;adopted constant/dynamic load models explicit"
  },
  "component_table_path": "final-components.csv",
  "display_precision": "at most2 decimal places;small masses in g",
  "original_source_precision": "raw MATLAB row literals and manufacturer parameter records preserved as provenance",
  "sources": [
    {
      "path": "reports/05_simulation/R23-001/runs/SIM-R3-001-he-v2/IE24_A12_P80G30_NOCHG-mass-closure.csv",
      "sha256": "ce4172dc105d8b4a948ceb53fd0a3fe5c9e1916bef4360941b4967dc727e1570"
    },
    {
      "path": "reports/06_reports/03_endurance_simulation/SIM-R3-001/integration-summary.json",
      "sha256": "c729c2a0d66dbc7038752aed8be8dbd174ea7c1397ca96c5be674a90871b0ead"
    },
    {
      "path": "reports/06_reports/02_power_system/POWER-R2-001/design-input.json",
      "sha256": "d59b5bd96a11f2cb19f7cd081663e08b97a7203dc8d689b2644345908308c0b4"
    },
    {
      "path": "reports/06_reports/02_power_system/POWER-R2-001/components.csv",
      "sha256": "a479cb85c1822e8c8712b10204a0adfc9fa51eea7085243a5780517ea4a74851"
    },
    {
      "path": "reports/06_reports/02_power_system/POWER-R2-001/references.json",
      "sha256": "83467c6c55d6c07def067f126b1884cd8ae062252e58f829ea6064604d34d464"
    },
    {
      "path": "reports/05_simulation/R23-001/equal-storage-supplement/summary.json",
      "sha256": "408d5be8dbb893a1238d45ff4f0ea17db09c8a901885563b541db779ac8cae64"
    },
    {
      "path": "reports/05_simulation/R23-001/equal-storage-supplement/parameters.csv",
      "sha256": "49c01f8eb34a31e94458479b96ce2721f38d3f17c1d49e38924bbfcbe4376c73"
    },
    {
      "path": "reports/05_simulation/R23-001/equal-storage-supplement/run-receipt.json",
      "sha256": "8b637d9d8f71bf0e21568aef03060c4dea8d44c0d1a0017db85e5416f992aa93"
    },
    {
      "path": "reports/05_simulation/R23-001/equal-storage-supplement/native-launch-receipt.json",
      "sha256": "a25b99f8edd11ffdba7b401df5b901d019a3cca040c621c2b8c75181fb112bb4"
    },
    {
      "path": "reports/04_models/R23-001/supplements/equal-storage/run_equal_storage.m",
      "sha256": "d664b6ebacdb0328673048f3e8463bf8d8bebf184c7ad5cb3b7b5ea310056458"
    },
    {
      "path": "reports/05_simulation/R23-001/range-supplement/summary.json",
      "sha256": "9be79b6a540fdffb5012aa068ba69150ea1203970c4916a1fd1b0ecb055ea22d"
    },
    {
      "path": "reports/05_simulation/R23-001/range-supplement/parameters.csv",
      "sha256": "749274a759317dacfa335769bf9dc20abcfcdc26c2e8fd2e9113892141e57839"
    },
    {
      "path": "reports/05_simulation/R23-001/range-supplement/run-receipt.json",
      "sha256": "976a3872440b8d1f1a54da5c4167551de26480bac2ffec84e7bb5540bcd29f20"
    },
    {
      "path": "reports/05_simulation/R23-001/range-supplement/native-launch-receipt.json",
      "sha256": "77b0675811d3c67891e2077f5691dd4560ec07f46f640b300171135b6f8895df"
    },
    {
      "path": "reports/04_models/R23-001/supplements/range/run_range.m",
      "sha256": "f01e54e769bacbc20b77e6342cc41a9fd37e5a840e91b71d416de45c1bc593d2"
    },
    {
      "path": "reports/05_simulation/R23-001/equal-storage-supplement/CG_CLIMB_CORRECTED_MAX_WORK-summary.json",
      "sha256": "a3a92abcf3fcf1de929b2e2322dafb6b96dc17f1d83806846b91b7ee3359d787"
    }
  ],
  "physical_model_executed_by_R2": false,
  "corrected_5mps_reference": {
    "model_version": "R23-HE2.1.0",
    "work_s": 8400,
    "flight_s": 9025,
    "flight_h": 2.51,
    "SOC_end_percent": 76.23,
    "H2_final_g": 15.38,
    "feasible": true,
    "source": "reports/05_simulation/R23-001/equal-storage-supplement/summary.json#/corrected_reference"
  },
  "equal_storage_comparison": {
    "model_version": "R23-HE2.1.0",
    "identity": "hypothetical capability,not a commercial bottle",
    "mass_boundary": "replaceB17/B18/B51 only;common B19/other hardware retained;all C01-C08 within hypothetical dry budget",
    "B": {
      "dry_storage_kg": 3.69,
      "wet_storage_kg": 4.7,
      "H2_initial_g": 1013.42,
      "M0_kg": 19.75,
      "flight_h": 9.22,
      "SOC_end_percent": 69.3,
      "feasible": true
    },
    "A": {
      "dry_storage_kg": 4.42,
      "wet_storage_kg": 5.43,
      "H2_initial_g": 1013.42,
      "M0_kg": 20.48,
      "flight_h": 8.72,
      "SOC_end_percent": 69.2,
      "feasible": true
    },
    "source": "reports/05_simulation/R23-001/equal-storage-supplement/summary.json",
    "source_sha256": "408d5be8dbb893a1238d45ff4f0ea17db09c8a901885563b541db779ac8cae64"
  },
  "stage2_accounting": {
    "energy_and_task_payload_kg": 11.4,
    "includes_task_payload_kg": 1.0,
    "companion_system_reserved_kg": 11.4,
    "actual_companion_system_kg": 8.35,
    "remaining_reserved_kg": 3.05,
    "raw_allocation_kg_literal": "11.396",
    "identity": "display rounding only;payload counted once"
  }
}
